The 32mm smooth jaws have precision-ground surfaces that provide smooth operation. The hakko chp pn-2006 long-nose pliers has a pointed nose with 1. 2mm width, 32mm smooth jaws, a flat outside edge, and Parkerized surfaces for general purpose electronics applications. The tool has precision-ground holes and surfaces that provide precise movement.
32mm smooth jaw with precision-ground surfaces provides smooth operation. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.
The company, is headquartered in Valencia, founded in 1984, CA. Parkerized surfaces prevent glare and increase corrosion resistance. American hakko Products manufactures soldering and desoldering tools.
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
32mm serrated jaw with precision-ground surfaces provides smooth operation. Nonslip hand grips provide comfort and control, and a dolphin-style curved fore-edge protects hands from cutting surfaces. Serrated jaws ease handling of small diameter parts, and the flat outside edges ease access to recessed or component-dense areas.
The company, is headquartered in Valencia, founded in 1984, CA. The hakko chp pn-2007 long-nose pliers has a flat nose with 3mm width, a flat outside edge, 32mm smooth jaws, and Parkerized surfaces for general purpose electronics applications. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
Long flat-nose pliers with 3mm width for general purpose electronics applications. The flat nose reduces the risk of damage to delicate parts and provides a wider surface for gripping parts. The tool has precision-ground holes and surfaces that provide precise movement.
Similar products
CHP-170 Micro Cutter
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
Hakko CHP PN-2005 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity
Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity
Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length
Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container
Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length
Hakko CHP PNB-2005 Long-Nose Angled Pliers, Pointed Nose, Flat Outside Edge, 45-Degree Angled Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
CHP-170 Micro Cutter
. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. The company, is headquartered in Valencia, founded in 1984, CA. The tool is constructed of 2. 5mm heat-treated carbon steel that provides durability and long life.
The hakko chp 170 micro soft-wire cutter has an 8mm long jaw set at a 21-degree angle for flush-cutting terminal wires up to 16 gauge 1. 3mm. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.
Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Long flat-nose pliers with 3mm width for general purpose electronics applications.
Similar products
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko 599B-02 Wire-type soldering iron tip cleaner
Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
Aven 17010 Adjustable Circuit Board Holder
Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow)
Eclipse Tools CP-301G Pro'sKit Precision Wire Stripper, 30-20 AWG
TR Industrial TR88302 Multi-Purpose Cable Tie (100 Piece), 8", Black
Stanley 84-096 5-Inch Needle Nose Plier
DOWELL 10-22 AWG Wire Stripper,Wire Crimper And Multi-Function Hand Tool，Professional Handle Design And Refined Craftsmanship.
Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Flat outside edge eases access to recessed or component-dense areas. 2. 5mm heat-treated carbon steel construction provides durability and long life. The hakko chp pn-2008 long-nose pliers has a flat nose with 3mm width, a flat outside edge, 32mm smooth jaws, and Parkerized surfaces for general purpose electronics applications.
Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. 32mm serrated jaw with precision-ground surfaces provides smooth operation. 32mm smooth jaw with precision-ground surfaces provides smooth operation. Parkerized surfaces prevent glare and increase corrosion resistance.
American hakko Products manufactures soldering and desoldering tools. 21-degree. The 32mm smooth jaws have precision-ground surfaces that provide smooth operation. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1.
Similar products
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
CHP-170 Micro Cutter
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity
Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity
Hakko CHP PN-2005 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Engineer SS-02 Solder Sucker
Elenco Breadboard with 830 Tie Points - 9425
Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length
Hobby Creek Helping Hands Third Hand Soldering Tool
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
Soft, rounded rubber grips for secure hold. This combination wire stripper, 28, shear, and pliers strips solid or stranded core wire in common electronic sizes: AWG 20, 22, 26, 24, and 30.32mm smooth jaw with precision-ground surfaces provides smooth operation. Long flat-nose pliers with 3mm width for general purpose electronics applications.
. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Serrated pliers for a strong grip.
3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. American hakko Products manufactures soldering and desoldering tools.
Similar products
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity
CHP-170 Micro Cutter
Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Extech MN35 Digital Mini MultiMeter
Uxcell a11041200ux0135 1M Type K Thermocouple Wire Lead 0-250C
Monoprice 24k Gold Plated Speaker Banana Plugs, Open Screw Type (1 Pair)
Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length
Striveday™ 30 AWG Flexible Silicone Wire Electric wire 30 gauge Coper Hook Up Wire 300V Cables electronic stranded wire cable electrics DIY BOX-1
Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container
Hakko CHP PN-2005 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Serrated pliers for a strong grip. Long flat-nose pliers with 3mm width for general purpose electronics applications. Combination wire stripper, shear, and pliers for multiple uses. The hakko chp pn-2005 long-nose pliers has a pointed nose with 1. 2mm width, 32mm serrated jaws, a flat outside edge, and Parkerized surfaces for general purpose electronics applications.
Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.
Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Flat outside edge eases access to recessed or component-dense areas. Long flat-nose pliers with 3mm width for general purpose electronics applications.
Similar products
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
CHP-170 Micro Cutter
Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length
Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity
Hakko CHP PN-2002 General Purpose Short-Nose Pliers, Pointed Nose, Smooth Jaws, 20mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity
Hakko CHP PN-2002-M Long Needle-Nose Pliers, Pointed Nose, Rounded Outside Edge, Smooth Jaws, 32mm Jaw Length, 1mm Nose Width, 3mm Thick Steel
Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length
Hakko CHP PN-2002 General Purpose Short-Nose Pliers, Pointed Nose, Smooth Jaws, 20mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Flat outside edge eases access to recessed or component-dense areas. Long flat-nose pliers with 3mm width for general purpose electronics applications. 2. 5mm heat-treated carbon steel construction provides durability and long life. Long flat-nose pliers with 3mm width for general purpose electronics applications.
Smooth jaws ease handling of delicate parts, and the flat outside edges ease access to recessed or component-dense areas. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.
3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
Similar products
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
CHP-170 Micro Cutter
Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP PN-2005 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP PN-2002-M Long Needle-Nose Pliers, Pointed Nose, Rounded Outside Edge, Smooth Jaws, 32mm Jaw Length, 1mm Nose Width, 3mm Thick Steel
Hakko CHP PN-2006 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity
Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity
Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber
Hakko CHP PN-2002-M Long Needle-Nose Pliers, Pointed Nose, Rounded Outside Edge, Smooth Jaws, 32mm Jaw Length, 1mm Nose Width, 3mm Thick Steel
3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Combination wire stripper, shear, and pliers for multiple uses.
Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Long pointed-nose pliers with 1mm width for general purpose electronics applications.
32mm smooth jaw with precision-ground surfaces provides smooth operation. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. 30-20 gauge maximum cutting capacity. Flat outside edge eases access to recessed or component-dense areas.
Similar products
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
CHP-170 Micro Cutter
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
Hakko CHP PN-2002 General Purpose Short-Nose Pliers, Pointed Nose, Smooth Jaws, 20mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP PN-2005 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity
Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length
Hakko CHP PN-2006 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity
Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length
American hakko Products manufactures soldering and desoldering tools. Soft, rounded rubber grips for secure hold. Long pointed-nose pliers with 1. 2mm width for general purpose electronics applications. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
2. 5mm heat-treated carbon steel construction provides durability and long life. Flat outside edge eases access to recessed or component-dense areas. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Non-magnetic stainless steel construction resists corrosion.
Heat-treated steel for strength and durability. Flat outside edge eases access to recessed or component-dense areas. The fine-point tips provide access to tight areas and are used for delicate precision work.
Similar products
Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length
Kester Solder 63/37 .015 DIA. 1LB SPOOL
Hakko T15-JS02 Conical Bent Tip R 0.2/30 Degree, 1.6 x 7.9 mm for FX-951
CHP-170 Micro Cutter
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
ChipQuik SMD-291 No Clean Flux in 10cc. (1 Ounce) Syringe with Nozzle
AmScope LED-144W-ZK White Adjustable 144 LED Ring Light Illuminator for Stereo Microscope & Camera
Remington Industries 34SNSP.25 34 AWG Magnet Wire, Enameled Copper Wire, 4 oz, 0.0069" Diameter, 2022' Length, Natural
Ultra Fine Thin Tip Tweezers for Weeding, Splinter Removal, Cellphone Repair, Micro soldering, Crafting, and Facial hair removal | Professional Strong Metal 8 inch Long Sturdy Stainless Steel Tweezer
MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)
Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity
Flat outside edge eases access to recessed or component-dense areas. The angled head enables wire to be cut flush to the work surface. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Pattern 3 tweezers with very-fine point tips for use in electronics assembly.
21-degree angled cutting surface eases access in component-dense areas. Soft, rounded rubber grips for secure hold. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.
Dolphin-style nonslip hand grips provide comfort and control, curved fore-edge protects hands from cutting surfaces, and Parkerized surfaces prevent glare and increase corrosion resistance. 32mm smooth jaw with precision-ground surfaces provides smooth operation.
Similar products
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
CHP-170 Micro Cutter
Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-2 Wire Stripper, 20-10 Gauge Maximum Cutting Capacity
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
Hakko CHP PN-2005 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP Micro Cutter, Clean Cut, 16 AWG (set of 5)
Engineer SS-02 Solder Sucker
Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length
Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length
Hakko CHP PNB-2005 Long-Nose Angled Pliers, Pointed Nose, Flat Outside Edge, 45-Degree Angled Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Flat outside edge eases access to recessed or component-dense areas. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. Short pointed-nose pliers with 1. 2mm width for general purpose electronics applications.
Long pointed-nose pliers with 1mm width for general purpose electronics applications. 32mm serrated jaw with precision-ground surfaces provides smooth operation. Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces. Flat outside edge eases access to recessed or component-dense areas.
Non-serrated tip for delicate applications. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. The tool has precision-ground holes and surfaces that provide precise movement.
Similar products
Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP CSP-30-1 Wire Stripper, 30-20 Gauge Maximum Cutting Capacity
CHP-170 Micro Cutter
Hakko CHP PN-2005 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP PN-2008 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel
Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity
Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container
Hakko CHP PN-2002 General Purpose Short-Nose Pliers, Pointed Nose, Smooth Jaws, 20mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
Hakko CHP PN-2006 Long-Nose Pliers, Pointed Nose, Flat Outside Edge, Smooth Jaws, 32mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
KESTER SOLDER 32117 24-6040-0027 60/40 Stand, 0.031" Diameter,"44", 1.5"
