Top 10 Fluke True RMS Multimeter – Multi Testers

As an Amazon Associate I earn from qualifying purchases.

1. Fluke

#ad

Fluke 115 Compact True-RMS Digital Multimeter

#ad
Fluke #ad - Check continuity, frequency, capacitance and diode test. Large white leD backlight to work in poorly lit areas. Measures 20 a 30 seconds momentary; 10 A continuous. True-rms for accurate measurements on non-linear loads. Large white led Backlight to work in poorly lit areas. Operating temperature -10 °c to + 50 °c storage Temperature -40 °C to + 60 °C. Cat iii 600 v safety rated. True-rms for accurate measurements on non-linear loads. Safety rated.
BrandFluke #ad
ManufacturerFluke #ad
Height3.31 Inches
Length6.57 Inches
Weight1.21 Pounds
Width1.82 Inches
Part Number2538790
ModelFLUKE-115

2. Fluke

#ad

Fluke 117 Electricians True RMS Multimeter

#ad
Fluke #ad - Large white leD backlight to work in poorly lit areas. Voltalert technology for non-contact voltage detection. Autovolt automatic ac/dc voltage selection. True rms for accurate measurements on non-linear loads. Operating temperature:-10°C to +50°C. Battery life:400 hours typical, without backlight. Low input impedance: helps prevent false readings due to ghost voltage. Dc millivolts - Range : 6000 mv, resolution : 01 mV.
BrandFluke #ad
ManufacturerFluke #ad
Height1.81 Inches
Length6.57 Inches
Weight0 Pounds
Width3.31 Inches
Part NumberFLUKE 117
ModelFLUKE-117

3. Fluke

#ad

Fluke 324 True RMS Clamp Meter

#ad
Fluke #ad - Hold button. Meets iec safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V. Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit.

Large, easy to read backlight display. Cat iv 300v/cat iii 600 volt safety rating. Slim, ergonomic design. Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms. Temperature and capacitance measurement. Audible continuity sensor confirms that the circuit conducts electricity. True rms sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform.
BrandFluke #ad
ManufacturerFluke #ad
Height2.72 Inches
Length9.49 Inches
Weight2 Kilograms
Width4.21 Inches
Part NumberFLUKE-324-BPSIN06666
ModelBPSIN06666-FLUKE-324

4. Fluke

#ad

Fluke 87V MAX True-rms Digital Multimeter

#ad
Fluke #ad - Built to take to harsh and extreme environments. True-rms accuracy with all functions of 87v and upgraded test leads. Safety rated cat iii 1000 v, cat iv 600 v meter to get you home safely from the job. Lifetime, backed by a brand you trust. Fully waterproof and dustproof with IP67 rating and 4-meter drop proven.
BrandFluke #ad
ManufacturerFluke Corporation #ad
Part NumberFLUKE-87V-MAX
ModelFLUKE-87V-MAX

5. Fluke

#ad

Fluke 179 ESFP True RMS Multimeter with Backlight and Temp

#ad
Fluke #ad - Industrial thermometer combo kit. Full featured DMM with advanced electronic troubleshooting functions plus probes. Test leads. Users manual. 80bk temperature Probe. Installed 9V battery.
BrandFluke #ad
ManufacturerFluke #ad
Height0 Inches
Length0 Inches
Weight2.2 Pounds
Width0 Inches
Part NumberFLUKE-179 EGFID
ModelFLUKE-179 ESFP

6. Fluke

#ad

Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit

#ad
Fluke #ad - The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals. The 117 multimeter features true RMS for accurate measurements on non linear loads. The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage. The 117 multimeter measures ac and dc voltage as well as AC and DC amps. The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage. The 323 clamp meter measures AC and DC voltage as well as AC amps.
BrandFluke #ad
ManufacturerFluke Corporation #ad
Height6.57 Inches
Length3.31 Inches
Weight1.76 Pounds
Width1.81 Inches
Part NumberFLUKE-117/323 KIT
ModelFLUKE-117/323 KIT

7. Fluke

#ad

Fluke 177 ESFP True RMS Digital Multimeter

#ad
Fluke #ad - Automatically turns off after 2 minutes to save battery life; the timeout feature can be disabled with a power up option. 6000 counts, updates 4 x second digital and 33 segments, updates 40 x second analog bargraph display.

The message "lead" appears briefly on the display when the rotary switch is moved to or from any a amps position. Hold: feezes the display at the push of a button; Auto hold: Display holds present reading until it detects new stable input, then the meter beeps and displays new reading. Closed case calibration through front panel. Frequency and capacitance measurements; resistance, continuity and diode measurements.

Ergonomic case with integrated protective holster. Min max average recording. Manual and automatic ranging with display hold and auto hold. Minimum, maximum, and average reading memory; in auto range, the meter selects the range with the best resolution for the present measurement value.
BrandFluke #ad
ManufacturerFluke #ad
Height3.4 Inches
Length9.6 Inches
Weight2.2 Pounds
Width7.2 Inches
Part Number1564560
ModelFLUKE-177 ESFP
WarrantyLimited lifetime warranty

8. Fluke

#ad

Fluke 113 True-RMS Utility Multimeter

#ad
Fluke #ad - Manual and auto ranging modes for user flexibility. Safety rated for category iii to 600Volts and Category IV to 300 Volts. True rms meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform. Digital multimeter measures AC/DC voltage, resistance, and capacitance and performs continuity and diode tests. Simultaneously checks for voltage and continuity.
BrandFluke #ad
ManufacturerFluke Corporation #ad
Height1.81 Inches
Length6.57 Inches
Weight1.21 Pounds
Width3.31 Inches
Part Number3078875
ModelFLUKE-113

9. Fluke

#ad

Fluke 325 Clamp Multimeter AC-DC TRMS

#ad
Fluke #ad - Ac voltage make for the most accurate measurements on non-linear signals. 400 a ac and dc current measurement. Audible continuity sensor confirms that the circuit conducts electricity.

Meets iec safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V. Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit. Resistance measurement up to 40 Frequency measurement. Temperature and capacitance measurement. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.
BrandFluke #ad
ManufacturerFluke #ad
Height2.72 Inches
Length9.49 Inches
Weight0.65 Pounds
Width4.21 Inches
Part NumberFLUKE-325
ModelFLUKE-325

10. Fluke

#ad

Fluke 287 True-RMS Stand Alone Logging Multimeter

#ad
Fluke #ad - Multi lingual interface. Backlit lcd displays multiple measurements simultaneously and plots measurements on a single line to detect signal anomalies over time. On board help screens for measurement functions.

Logging features designed for unattended monitoring. True rms meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform. Auto and manual ranging, current, frequency, conductance, resistance, temperature, capacitance, pulse width, datalogging digital multimeter measures voltage, and duty cycle.

Datalogging features include minimum, real time clock, on screen graphing, data hold, maximum, and average, and data export to a computer. Specifications include european conformity ce marking, ul, iec safety standard 61010 and is certified for Category I installations up to 1000V and Category II installations up to 300V, CSA, IEC/EN 61010 1 2nd edition for 1 meter drop.
BrandFluke #ad
ManufacturerFluke Corporation #ad
Height3.5 Inches
Length10.25 Inches
Weight2 Pounds
Width7.75 Inches
Part Number2740201
ModelFLUKE-287
Warranty30 day warranty on material and workmanship