As an Amazon Associate I earn from qualifying purchases.
1. Fulton #ad
Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape #adFulton #ad
- On the back, there is an offset track for mounting the fence to a miter gauge. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence. When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade.
With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts. The aluminum miter fence has been cut at 45 degrees on both ends of the fence.
Full color installation instructions are included. The fulton aluminum miter fence is made from one, solid piece of extruded aluminum and has the exact same size track on the top of the fence as there is on the bottom. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous.
The fence can be mounted to low profile miter gauges or standard profile miter gauges simply by flipping the fence over to accommodate your miter gauge. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This fence will fit most available after market and factory table saw miter gauges, however some modification may be required.
2. Fulton #ad
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop #adFulton #ad
- The head is mounted to a solid steel miter bar that measure 18” in length and is. 354” thick by. 730” wide. When not in use the flip stop can be flipped up and out of the way. This allows you to position the fence extra close to the saw blade with the power turned off so you have even more control over the workpiece you are cutting.
The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. Both ends of the fence are cut at exactly 45 degrees. 1 tape is left to right reading and the other is right to left reading.
1 hole is at 90 degrees while the 6 holes on both sides are at 22. 5, 30, adjustable, pull the spring loaded indexing pin outward, 45, 67.5 and 90 degrees. The. 200” thick, solid aluminum head is machined with 13 positive stop holes.
The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Also include are two sticky back measuring tapes.
3. POWERTEC #ad
POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” multi –track fence with 27 Angle Stops #adPOWERTEC #ad
- Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts including cross cutting while quick and accurate project results.
Multi-track miter fence: smooth, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, laser engraved scale, 1/4” t-bolts and 5/16” T- bolts. Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Includes: 1 table saw miter gauge, 1 multi-track miter fence, 1 t-track flip stop. High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 30° and 45° and nine others, 10°, 22½°, both left and right.
4. INCRA #ad
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop #adINCRA #ad
- Engraved stainless steel primary scale for precision accuracy. 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths.
Patented glidelock miter bar with 6 expansion points for quick repeats. Incra flip shop stop-Fence Positioner for optimal mitering accuracy. 41 laser cut v-stops for extreme accuracy at all popular angles.
|Warranty||1 year replacement warranty|
5. KREG #ad
Kreg KMS7102 Table Saw Precision Miter Gauge System, Blue #adKREG #ad
- Guaranteed out of the box to. 003 accuracy of 6-inches. Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch 610mm anodized-aluminum bar is 3/8 inch9.
5mm thick by 3/4 inch19mm wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver. Gauge head is cnc machine perfectly square to the bar and table no stampings. Factory calibration.
|Manufacturer||Kreg Tool Inc #ad|
6. Saycker #ad
Band Saws, Router Tables, JointersBlack, Table Saw Miter Gauge with Aluminum Miter Fence,Both Sides 60 Angle Adjustable,Be Used for Table Saws #adSaycker #ad
- Material: this woodworking tool is made of alluminium alloy, ensuring its durability and sturdy. Perfect for wood cutting project: can be used for table saws, band saws, router tables, jointers.
Miter gauge fence system is currently a must-have for every family. Feature: our aluminum miter fence is made from one, solid piece of extruded aluminum.
On the back, there is an offset track for mounting the fence to a miter gauge. Increase the leveling baffle: Increase the touch area with the material, and push the material more stably. Easy to use: both sides 60 angle adjustable, loosen the knob to quickly adjust the angle, Ideal for cross-cutting wood at a specific angle.
7. VEVOR #ad
24" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale, VEVOR Precision Miter Gauge #adVEVOR #ad
- 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 30, 22. 5, 45, 60 and 90 degrees. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle. Additional trim blocks raises working efficiency.
Simple & secure operation: an adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. It is an economical solution for your table saw crosscutting needs. Wide application: the table saw miter can improve the safety and accuracy of the table saw and the router table.
Precise angle cutting: this table saw accessory is 004 inch / 1 mm high precision. The mitre gauges are flat without burr, secure, and hands-free.
The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting. Laser marking technology is friction-resistance to ensure accuracy. Metric and imperial scale makes your work more convenient. The adjustable, solid aluminum head is machined with 11 positive stop holes. It also can be used for router tables and jointers. Miter gauge fence system is currently a must-have for every family.
|Part Number||24 inch Table Saw Miter Gauge|
|Model||24 inch Miter Gauge|
8. VEVOR #ad
VEVOR Precision Miter Gauge, 18" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale #adVEVOR #ad
- The miter gauges are flat without burr, and hands-free. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 60 and 90 degrees. Simple & secure operation: an adjusting screw and guide wheel are added in the middle, secure, which is more convenient to insert into the slot hole and fix the seat.
It is an economical solution for your table saw crosscutting needs. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle.
It also can be used for router tables and jointers. Compatible standeded slot: our table saw sled is suitable for a standard 075 x 038-inch miter slot. Miter gauge fence system is currently a must-have for every family.
The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting. Precise angle cutting: this table saw accessory is 004 inch / 1 mm high precision. Additional trim blocks raises working efficiency. Premium sturdy construction: this woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. Laser marking technology is friction-resistance to ensure accuracy.
|Part Number||18 inch Miter Gauge|
|Model||18 inch Miter Saw Fence|
9. INCRA #ad
INCRA Miter1000/HD Miter Gauge #adINCRA #ad
- 1/10th-degree vernier cursor, telescoping Fence Expands from 18-Inch to 31-Inch Overall Length. 180 angle lock indexing stops with 1-degree Step Spacing and Special Stops at ±22-1/2-Degree.
Patented glide lock miter Bar Expansion Disks Provide a Perfect Fit. Patented incremental Flip Shop Stop for Prefect Cut Length Control. Removable retaining Clip for T-Slot Miter Channels. Heavy duty machined and laser cut Components.
|Warranty||See Manufacturer's Website for Details.|
10. O'SKOOL #ad
O'SKOOL Replacement Miter Gauge fits DeWalt table saws DWE 7490X Type 1 and Type 2, 7491RS Type 1 and Type 2, 7499GD Type 1and Type 2 #adO'SKOOL #ad
- This replacement miter gauge is simple to install, which minimizes downtime. The miter gauge only fits dewalt dwe 7490x type 1, dwe 7491rs type 1, we 7499GD Type 1, dwe 7490x type 2, dwe 7491rs type 2, DWE 7499GD Type 2.
There are lines for every one angle on miter gauge body, 60, including larger lines at the five degree marks 30, 45, 75 and 90 .
This allows you to adjust the miter gauge to any angle you need. The purpose of a miter gauge is to allow user to position and safely guide the workpiece. Includes: 1 Miter Gauge Assembly. The miter bar swize is 22. 5mm x 9. 2mm x 300mmw x H x L.