Top 10 PSI Woodworking Chuck – Power Drill Chucks

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2" 2MT

#ad
PSI Woodworking #ad - The #2mt arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included. Removes easily with knock out bar. Includes the 1/2" drill chuck, #2 Morse Taper Arbor, and Jaw Tightening Key. This 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories. Great for holding drill bits, pen mandrel shafts, small turnings, dowels, and much more.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberTM32
ModelTM32
Warranty2 Years Under Normal Use

2. PSI Woodworking

#ad

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

#ad
PSI Woodworking #ad - Includes: 1 barracuda2 chuck body, 1 allen wrench, 1 gear key, 8 screws, 4 self-centering jaw sets, 1 spindle adapter, 1 woodworm screw chuck, 1 storage case. This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, set of 2 Alligator Jaws LCALJAWS, 8-1/4" Super Finishing Jaws CJAWXL, 5" Small Flat Jaws CJAWFJ1, Pen Blank Drilling Jaws CJAWPEN, and more!.

5" diameter and weighs 4 lbs. Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter. 1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4". Barracuda2 chuck body is 3. With the variety of included jaws, other small turning projects, pens, spindles, The CSC3000C will mount most turning projects onto your Lathe; including bowls, and much more.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5.25 Inches
Length10.2 Inches
Weight8.6 Pounds
Width5 Inches
Part NumberCSC3000C
ModelCSC3000C
Warranty2 Years Under Normal Use

3. PSI Woodworking

#ad

PSI Woodworking Products TM32KL 1/2-Inch Keyless Drill Chuck with #2 Morse Taper Arbor 1/2" 2MT Keyless

#ad
PSI Woodworking #ad - Great for holding drill bits, pen mandrel shafts, small turnings, dowels, and much more. The #2mt arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included. Includes the 1/2" keyless Drill Chuck and #2 Morse Taper Arbor. Removes easily with knock out bar. This 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height2.8 Inches
Length5.1 Inches
Weight1.85 Pounds
Width2.9 Inches
Part NumberTM32KL
ModelTM32KL
Warranty2 Years Under Normal Use

4. PSI Woodworking

#ad

PSI Woodworking CJAWXL 8-1/4" Flat Jaws for PSI C-Series Lathe Woodturning Chucks

#ad
PSI Woodworking #ad - Ideal for finishing and polishing woodturning bowl and plate bottoms. Includes 16 soft rubber gripper bumper pins in two lengths to securely hold your workpiece: 8 1/2" & 8 3/4"; Pins have a 6mm thread; Also includes Allen Wrench. Grips workpieces from 2-3/4" to 8-1/4" diameter; 7 positions for bowl rim placement; Made from cast aluminum; Weighs 1. 50 pounds. Cjawxl repaces both cjawfj1 and CJAWFJ2. Cjawxl is a psi c-series accessory that is compatible with all psi c-series chucks CSC3000C, CUG3418CC, CMG3C, CSC3500SE, CSC2000C.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Weight1.5 Pounds
Part NumberCJAWXL
ModelCJAWXL
Warranty2 Years Under Normal Use

5. PSI Woodworking

#ad

PSI Woodworking LCM18X Wood Lathe 3-Jaw Micro Chuck

#ad
PSI Woodworking #ad - 20 lbs; includes 2 Tightening Levers. Pre-threaded to 1" x 8tpi and includes a 3/4" x 16tpi lathe headstock spindle adaptor. Self-centering 3-jaw micro chuck is ideal for holding small woodturning projects and drilling. Diameter is 2-1/2" and weighs 1. Reversible step jaws can hold work-piece from the inside or outside. Inside hold from 3/4" to 2-1/2"; Outside hold up to 1-1/4".
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberLCM18X
ModelLCM18X
Warranty2 Years Under Normal Use

6. PSI Woodworking

#ad

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

#ad
PSI Woodworking #ad - Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes. Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter. Includes #1 step jaws 3/32" to 1-7/8" external & 11/32" to 3-3/8" internal; includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal. This "c-series" chuck is compatible with all "C-Series" jaws and accessories. Includes screw chuck, allen wrench, and a set of tightening levers.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height4 Inches
Length4 Inches
Weight4.95 Pounds
Width2 Inches
Part NumberCUG3418CC
ModelCUG3418CC
Warranty2 Years Under Normal Use

7. PSI Woodworking

#ad

PSI Woodworking CF3SC 3" Lathe Faceplate/Screwchuck for 1" x 8tpi Spindle

#ad
PSI Woodworking #ad - Combination of screw chuck & faceplate mount provides a very safe & secure bowl turning setup. 4 mounting holes with additional screw chuck option. Pre-threaded to 1" x 8TPI. Includes 2 1" screw chucks and 8 spare mounting screws. 3" steel faceplate with screw chuck.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height3 Inches
Length3 Inches
Weight1.39 Pounds
Width2 Inches
Part NumberCF3SC
ModelCF3SC
Warranty2 years under normal use

8. PSI Woodworking

#ad

PSI Woodworking LA341018 Lathe Headstock Spindle Adapter 3/4" x 10tpi to 1" x 8tpi

#ad
PSI Woodworking #ad - Wrench not included. Convert a 3/4" x 10tpi lathe headstock spindle to 1" x 8tpi. Flats allow for solid wrench tool grip for tightening and loosening from spindle. Made of steel; weighs. 85 pounds; extends spindle length approximately 1-1/2". Allows a 3/4" x 10tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height2.5 Inches
Length4.5 Inches
Weight0.85 Pounds
Width2.5 Inches
Part NumberLA341018
ModelLA341018
Warranty2 Years Under Normal Use

9. PSI Woodworking

#ad

PSI Woodworking LTCA18 Live Tailstock Chuck Adapter to 1" x 8tpi Thread with #2 Morse Taper Mount

#ad
PSI Woodworking #ad - Ideal for an additional secure workpiece mount from tailstock end; Allows precision centering of spindles or dowels at the tailstock end; Provides the ideal system for the mounting of bowls for hollowing. Mounts to tailstock with the included #2 Morse Taper arbor. Wrench is included. Converts your lathe's #2MT dead tailstock to 1" x 8tpi threaded live tailstock. After being mounted, tailstock is converted from dead to live and it will accept all 1" x 8tpi threaded lathe tool accessories.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height2.5 Inches
Length8.5 Inches
Width3 Inches
Part NumberLTCA18
ModelLTCA18
Warranty2 Years Under Normal Use

10. PSI Woodworking

#ad

PSI Woodworking Products LCDOWEL Dowel Collet Chuck System

#ad
PSI Woodworking #ad - Also includes Blow molded carrying case for easy storage. After assembly, screw chuck on lathe spindle and tighten sleeve nut around work piece.

Easily hand tightens to safely secure collet and work piece. Ideal for gripping pen mandrels, bottle stoppers, and other small woodturning projects where a Tenon is used for Chucking. Get precision gripping and centering of small diameter dowels, tenons, spindles. Collet will 'snap' into position within the sleeve nut. Collet chuck body pre-threaded to 1" x 8TPI, 1 3/4" X 16TPI Lathe headstock spindle adapter. 5 included er32 collets: 1/4", 3/8", 5/8", 1/2", 3/4".
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height3.3 Inches
Length10.5 Inches
Weight4.85 Pounds
Width7.9 Inches
Part NumberLCDOWEL
ModelLCDOWEL
Warrantytwo years