As an Amazon Associate I earn from qualifying purchases.
SellyOak #ad - For cutting various materials: can be used for hard wood, softwood, synthetic board and so on, but to avoid processing materials that are too hard. Premium material: solid hardened steel bodies with Anti-Kickback Design and heat- resistant Teflon coating, the blade is sharp and the bearings won‘t break.
Various cutting depth: interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing.
Freud #ad - 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits. Wrench included. D 1-3/8", carbide height h 1/2", 1/4" Shank. Use on hand-held and table-mounted portable routers. Overall dia. Cuts all composition materials, hardwoods, plywoods, and softwoods.
KOWOOD #ad - Specify for rabbet cuts in the wood work project for any art or craft. Problem-free router bit, it is suitable for all range’s router such as handheld router and table router.
All dimensions and weight are in description below. 1-3/8” height, 1/4", 3/8", interchangeable bearing in 6 different depths 1/8", 7/16", 5/16", 1/2" with 1/4” shank High performance Rabbet Router Bit.
YAKAMOZ #ad - Solid hardened Steel Bodies with Anti-Kickback Design. 1-3/8 inch diameter with 6 bearings 1/8", 1/4", 3/8", 5/16", 7/16" and 1/2". Use on hand-held and table-mounted portable routers.
TOOLDO #ad - Suitable for plywood, wooden door frames, solid wood, MDF, cabinets and boxes, wooden window frames, particleboard, etc. Use on hand-held and table-mounted portable routers. Tooldo 1/4-inch shank rabbet router bit with 6 bearings 1/8"、1/4"、5/16"、3/8"、7/16"、1/2".
CHoiKWong #ad - Avoid cutting metal and non-wood materials such as steel, plywood, MDF, iron and sand. High-quality service if you have any problems using our product, Please contact us immediately, we will provide you with a solution that 100% satisfaction you.
Widely applications this professional rabbeting bit set suitable for wood, particle board, acrylic and different wood composites. Plus a turning electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Note: the short clamping of this product might cause bend.
Gift. Durable c3 carbide tipped, balanced craftsmanship and solid hardened steel body with clever Anti-Kickback design for sharp and long lasting cutting and precision grinding for proper balance at high RPM creates smooth delicate cuts in the project reduce debris and burrs. Versatile router tool rabbet router bit 1/4" shank, 2 cut height 1/2" and 3/8", 7/16", 1/8", with 6 interchangeable bearing used for cut different depths 1/2", 3/8", 1/4", 3/16", 5/16", 1/16".
Freud-Diablo #ad - D 1-3/8", carbide height h 1/2", 1/2" Shank. Wrench included. Use on hand-held and table-mounted portable routers. 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits. Overall dia. Cuts all composition materials, hardwoods, plywoods, and softwoods.
Wolfride #ad - Yg6 alloy blade and carbon steel cutter body, with coating. Suitable for density board, particleboard, MDF, solid wood, etc. 4 wings 1/4 inch shank rabbeting router bits with top bearing for grooving. Cutting diameter: 1-3/8"; cutting depth: 1/2"; Cutting Height: 1/4", 3/8", 1/2".
HOHXEN #ad - Multi-purpose use the rabbet router bits is suitable for all range's router such as handheld router and table router. You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily. Bearing dia: 3/8", 3/8", 1/2", 5/16", 3/4", rabbet cutting Depths: 1/2", 1-1/8".
We offer "24 month" warranty on item that confirm to be manufacturer defect. If you have any questions, please email to our after-sale team, we will try our best to solve your problem. Please avoid cutting ferrous metal and non wood materials, sand, iron, particle board, etc.
For cutting various materials suitable for solid woods, plywood compact panel, laminate, such as:steel, mdF, acrylic and etc. Professional quality rabbet router bit the router bit cutter material is YG6 solid hardened steel with anti-kickback design. Note: the short clamping of this product might cause bend. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning.
SellyOak #ad - All dimensions and weight are in description below. Cutting depth 1/8 to 1/4-inch: rabbet router bit set with Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing.
Premium material: rabbet router bit, Solid Hardened Steel Bodies with carbide blades, which run effortlessly through all Composition Materials. Warm reminder for our customers: Please check the shank size for your router takes to avoid ordering in mistake.
1. SellyOak
#ad5/16", 7/16", 3/8", 1/4 Inch Shank Rabbet Router Bit with 6 Bearings Set, 1/4", SellyOak Multi Rabbeting Router Bit Set for Multiple Depths 1/8", 1/2" Interchangeable and Adjustable Bearings
#adVarious cutting depth: interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing.
More information #ad
All dimensions and weight are in description below. Specify for rabbet cuts in the wood work project for any art or craft. Warm reminder for our customers: Please check the shank size for your router takes to avoid ordering in mistake. Wide in use: reliable rabbet router bit for DIYer and 100% satisfy to experienced woodsmith.| Brand | SellyOak #ad |
| Manufacturer | PUSU Electrical Co., Ltd. #ad |
| Part Number | RRB-2 |
More information #ad
2. Freud
#adFreud Flush, 1/8",1/4",5/16",3/8",7/16",1/2" Depth Rabbeting Bit Set with interchangeable bearings with 1/4" Shank 32-504
#adMore information #ad
| Brand | Freud #ad |
| Manufacturer | Freud #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.38 Pounds |
| Width | 1 Inches |
| Part Number | 32-504 |
| Model | 32-504 |
More information #ad
3. KOWOOD
#adKOWOOD 1/4" inch Shank 1-3/8" Height Multi-Slot milling Cutter bit 7 Bearings, Multiple Depths 1/8", 3/16",1/4", 7/16", 5/16", 3/8", 1/2" Interchangeable and Adjustable Bearings.
#adAll dimensions and weight are in description below. 1-3/8” height, 1/4", 3/8", interchangeable bearing in 6 different depths 1/8", 7/16", 5/16", 1/2" with 1/4” shank High performance Rabbet Router Bit.
More information #ad
Shank is to manufacturing precision measurement with a quality check to minimum tolerance and vibration during spinning. Kindly reminder for our customer checks the shank size for your router takes to avoid ordering in mistake. High-grade carbide maximum strength and durable. Reliable router bit for diyer and 100% satisfy to experienced woodsmith.| Brand | KOWOOD #ad |
| Manufacturer | KOWOOD #ad |
| Height | 1.97 Inches |
| Length | 2.76 Inches |
| Weight | 0.44 Pounds |
| Width | 4.13 Inches |
More information #ad
4. YAKAMOZ
#ad5/16", 1/2" Bearings, 1/4", 3/8", 7/16", Yakamoz 1/4 Inch Shank Rabbet Router Bit with 6 Bearings Set | 1/8"
#adMore information #ad
Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces. Cuts all composition materials, plywoods, hardwoods, and softwoods.| Brand | YAKAMOZ #ad |
| Manufacturer | Yakamoz #ad |
| Weight | 0.35 Pounds |
| Part Number | GY0126 |
More information #ad
5. TOOLDO
#ad5/16", 1/4", 1/2" Interchangeable and Adjustable Bearing, 7/16", 3/8", TOOLDO Height Multiple Rabbet Router Bit Set 1/4” Shank 1-3/8” 1/8"
#adMore information #ad
Rabbet router bit set with Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing. Rabbet router bit set is made of C2 carbide blades, high finish, high-quality alloy blade, long service life.| Brand | TOOLDO #ad |
| Manufacturer | TOOLDO #ad |
| Part Number | TR128 |
More information #ad
6. CHoiKWong
#ad1/4", 1/4 Inch Shank Rabbet Router Bit with 6 Bearings, 5/16", 7/16", 1/16" Interchangeable Bearings, 3/8", 3/16", 1/8", CHoiKWong Carbide Tipped Rabbeting Router Bit Set for Multi Depths 1/2"
#adWidely applications this professional rabbeting bit set suitable for wood, particle board, acrylic and different wood composites. Plus a turning electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Note: the short clamping of this product might cause bend.
More information #ad
Applicable equipment: use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machines, trimming machines, etc. Gift. Durable c3 carbide tipped, balanced craftsmanship and solid hardened steel body with clever Anti-Kickback design for sharp and long lasting cutting and precision grinding for proper balance at high RPM creates smooth delicate cuts in the project reduce debris and burrs. Versatile router tool rabbet router bit 1/4" shank, 2 cut height 1/2" and 3/8", 7/16", 1/8", with 6 interchangeable bearing used for cut different depths 1/2", 3/8", 1/4", 3/16", 5/16", 1/16".
| Brand | CHoiKWong #ad |
| Manufacturer | CHoiKWong #ad |
| Part Number | 2983 |
More information #ad
7. Freud-Diablo
#ad7/16", 1/2" Depth Rabbeting Bit Set with interchangeable bearings with 1/2" Shank 32-522, 3/8", Freud 5/16"
#adMore information #ad
| Brand | Freud-Diablo #ad |
| Manufacturer | Freud #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.34 Pounds |
| Width | 1 Inches |
| Part Number | 32-522 |
| Model | 32-522 |
More information #ad
8. Wolfride
#adWolfride 3PCS Rabbeting Router Bits 1/4 Shank Top Bearing Rabbet Router Bit Set Slot Cutter Router Bit
#adMore information #ad
| Brand | Wolfride #ad |
| Manufacturer | Wolfride #ad |
| Part Number | RRB-03 |
More information #ad
9. HOHXEN
#adAdjustable Bearings 3/8", 3/4", 7/8", 1-1/8", 1/2", 5/8", HOHXEN Rabbet Router Bit 1/4 Inch Shank with 6 Bearings Set Rabbeting Router Bits
#adWe offer "24 month" warranty on item that confirm to be manufacturer defect. If you have any questions, please email to our after-sale team, we will try our best to solve your problem. Please avoid cutting ferrous metal and non wood materials, sand, iron, particle board, etc.
More information #ad
The router bit is packed in a plastic box for easy storage and carry. Size of the rabbet router bit the router bits shank: 1/4", 1/4", 7/8", 5/8", 7/16", cutting height: 1/2", 1/8". Perfect after-sale service we always provide good customer service and purchase experience to our customers. For cutting various materials suitable for solid woods, plywood compact panel, laminate, such as:steel, mdF, acrylic and etc. Professional quality rabbet router bit the router bit cutter material is YG6 solid hardened steel with anti-kickback design. Note: the short clamping of this product might cause bend. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning.
| Brand | HOHXEN #ad |
| Manufacturer | HOHXEN #ad |
| Part Number | WJ-HO-5017-1/4-FBA |
More information #ad
10. SellyOak
#ad1/4 Inch Shank 4-Wing Rabbet Router Bit with 6 Bearings Set, 7/16", 1/4", 5/16", 3/8", Multiple Depths 1/8", SellyOak Multi Rabbeting Router Bit Set for 1/2 Cutting Width, 1/2" Adjustable Bearings
#adPremium material: rabbet router bit, Solid Hardened Steel Bodies with carbide blades, which run effortlessly through all Composition Materials. Warm reminder for our customers: Please check the shank size for your router takes to avoid ordering in mistake.
More information #ad
Wide in use: reliable rabbet router bit for DIYer and 100% satisfy to experienced woodsmith. For cutting various materials: this rabbet router bit can be used for hard wood, synthetic board and so on, softwood, but to avoid processing materials that are too hard. Specify for rabbet cuts in the wood work project for any art or craft.| Brand | SellyOak #ad |
| Manufacturer | PUSU Electrical Co., Ltd. #ad |
| Part Number | RT-R-004 |
More information #ad
