Top 10 Scary Sharp Sharpening System – Sharpening Stones
As an Amazon Associate I earn from qualifying purchases.
Taytools #ad - The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective. Float glass will accommodate a half sheet of lapping film. This set contains three sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes.
Taytools #ad - This set contains two sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes. 3. The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.
Taytools #ad - Lapping film has pressure sensitive Adhesive PSA backing with 3 mil high-strength polyester film backing to minimize tearing. 5/16 float glass is dead flat and the perfect substrate to attach abrasive sheets. The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.
3M (TM) #ad - Pressure sensitive Adhesive PSA with 3 mil high-strength polyester film backing. Sizes: 4-1/4" x 11". 100% made in the USA. Aluminum Oxide AO abrasive material. 7 sheet bundle containing the following micron sizes. 3, 9, 1, 12, 3, 30 and 40.
Taytools #ad - This is a set of 3 pieces of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System. The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.
Taytools #ad - The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective. Float glass is dead flat and the perfect substrate to attach abrasive sheets.
Taytools #ad - The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.
Microfinishing/lapping film will need to be cut to size to fit float glass plate. This is a set of 2 pieces of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
Work Sharp #ad - Pivot-response technology - allows you to use the same sharpening technique for curved & straight blades. Ceramic field hone - packable ceramic field hone sharpens recurve blades, serrated knives, fish hooks, & medium diameter for serrations & stows away as a light weight sharpener for touch-up sharpening in the field.
Proud to be an american company - this tool was engineered and assembled by hard working Americans. With pivot-response engaged, the entire diamond plate pivots to follow the edge profile, successfully creating a consistent edge along the entire length of the blade.
Magnets secure the guides during sharpening & interchanged without tools or calibration. For over 40 years we have been creating industry-leading sharpening tools here in the USA. Precision angle guides - interchangeable angle guides establish optimum sharpening angles. Includes three ceramic rods: small & three position large rod. Work sharp is part of Darex, a 4th-generation family owned company in Ashland, Oregon.
Taytools #ad - Float glass is dead flat and the perfect substrate to attach abrasive sheets. The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.
1. Taytools
#adTaytools 279205 Three Sheets 5/16 x 5 x 12 Deal Flat Float Plate Glass with 7 Sheets 3M TM Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System
#adMore information #ad
3. 5/16 float glass is dead flat and the perfect substrate to attach abrasive sheets. Lapping film has pressure sensitive Adhesive PSA backing with 3 mil high-strength polyester film backing to minimize tearing. 1, 3, 5, 12, 30 and 40.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 279205 |
| Model | 279205 |
More information #ad
2. Taytools
#adTaytools 279199 Two Sheets 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M TM Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System
#adMore information #ad
1, 3, 12, 5, 30 and 40. 5/16 float glass is dead flat and the perfect substrate to attach abrasive sheets. Float glass will accommodate a half sheet of lapping film. Lapping film has pressure sensitive Adhesive PSA backing with 3 mil high-strength polyester film backing to minimize tearing.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 279199 |
| Model | 279199 |
More information #ad
3. Taytools
#adTaytool 279182 Single Sheet 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M TM Lapping Microfinishing Film for Scary Sharp Sharpening System
#adMore information #ad
This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes. 3. Float glass will accommodate a half sheet of lapping film. 1, 5, 12, 3, 30 and 40.| Brand | Taytools #ad |
| Manufacturer | Taytools #ad |
| Part Number | 279182 |
| Model | 279182 |
More information #ad
4. Robert Sorby
#adRobert Sorby PEB01C Proedge Basic Sharpening System
#adRobert Sorby #ad - Comes equipped with stock tool rest and 120 AO and 60 grit Zirconium belts. Designed for the woodworker, and perhaps the easiest to set up and use. Sharpens bench, drill bits, framing, plane irons, carving and turning chisels, knifes and garden tools.More information #ad
Nine factory indexed settings provide a guide for all types of tools. Wide range of accessories and grits available. Sharpen at the exact angle every time.| Brand | Robert Sorby #ad |
| Manufacturer | Robert Sorby #ad |
| Part Number | PEB01C |
More information #ad
5. 3M (TM)
#ad3M TM 7 Sheet 4-1/4 inch x 11 inch PSA Lapping Microfinishing Film For Scary Sharp Sharpening System Aluminum Oxide AO
#adMore information #ad
| Brand | 3M (TM) #ad |
| Manufacturer | 3M (TM) #ad |
| Part Number | 279175 |
| Model | 279175 |
More information #ad
6. Taytools
#adTaytools 773444 Set of Three Pieces 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System
#adMore information #ad
Pressure sensitive adhesive psA lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass. Microfinishing/lapping film will need to be cut to size to fit glass plate. Float glass is dead flat and the perfect substrate to attach abrasive sheets.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 773444 |
| Model | 773444 |
More information #ad
7. Taytools
#adTaytools 279168 Three Pieces 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System
#adMore information #ad
Comes with anti-slip pad. This is a 3 piece set of of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System. Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 279168 |
| Model | 279168 |
More information #ad
8. Taytools
#adTaytools 773437 Set of Two Pieces 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System
#adMicrofinishing/lapping film will need to be cut to size to fit float glass plate. This is a set of 2 pieces of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
More information #ad
Pressure sensitive adhesive psA lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass. Float glass is dead flat and the perfect substrate to attach abrasive sheets.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 773437 |
| Model | 773437 |
More information #ad
9. Work Sharp
#adWork Sharp Guided Sharpening System
#adProud to be an american company - this tool was engineered and assembled by hard working Americans. With pivot-response engaged, the entire diamond plate pivots to follow the edge profile, successfully creating a consistent edge along the entire length of the blade.
More information #ad
Guides are easily flipped from 17° to 20° to accommodate a wide range of knives. Pivot response puts the skill in the tool and sharpening easy. Magnets secure the guides during sharpening & interchanged without tools or calibration. For over 40 years we have been creating industry-leading sharpening tools here in the USA. Precision angle guides - interchangeable angle guides establish optimum sharpening angles. Includes three ceramic rods: small & three position large rod. Work sharp is part of Darex, a 4th-generation family owned company in Ashland, Oregon.
| Brand | Work Sharp #ad |
| Manufacturer | Work Sharp #ad |
| Height | 6.5 Inches |
| Length | 8.5 Inches |
| Weight | 2.25 Pounds |
| Width | 2.5 Inches |
| Part Number | WSGSS |
| Model | WSGSS |
| Warranty | 42-Year Warranty covers defects due to workmanship and design, excluding abrasives. Warranty covers consumer use only, not industrial or commercial use. |
More information #ad
10. Taytools
#adTaytools 279151 Two Pieces 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System
#adMore information #ad
Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film. This is a 2 pieces set of of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System. Comes with anti-slip pad.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 279151 |
| Model | 279151 |
More information #ad