Top 10 Siding Installation Tool – Home Improvement

As an Amazon Associate I earn from qualifying purchases.

1. PacTool


PacTool International SA903 Gecko Gauge, Fiber Cement Siding Installation Tool 1 Set

PacTool #ad - One-person installation – working as a pair, the gecko gauge fiber cement siding tool supports fiber cement-board siding for one-person installation with virtually no layout time.

Won’t scratch or mar – heavy gauge plastic won’t scratch or mar pre-painted siding. Use with fiber-cement siding – use the sa903 gecko gauge siding tool with 5/16” fiber-cement siding, including James Hardie’s updated HZ5 series with new “eased” drip-edge profile. Patented friction-cam mechanism - supports full 12’ fiber cement-board siding lengths. Adjustable – gauge is adjustable at 1/4” increments for 4”-8” siding reveals.
BrandPacTool #ad
ManufacturerGeneral Tools & Instruments #ad
Height16 Inches
Length12 Inches
Weight1.3 Pounds
Width12 Inches
Part NumberSA903

2. Malco


2 Pc, Siding Overlap Gauge Set

Malco #ad - No adjustments to vary and nothing to mark. Made in the USA. Works on old or new 5/16-Inch fiber cement siding plank. Allows 1-person installation of siding planks. Will not mar finish of pre-painted siding. Two gauges support the entire length of plank and precisely gauge a standard 1-1/4-Inch overlap - even on a bowed wall.
BrandMalco #ad
ManufacturerMalco #ad
Height1.75 Inches
Length14.75 Inches
Weight0.65 Pounds
Width5.75 Inches
Part NumberFCG2
WarrantyLifetime against materials and workmanship

3. PacTool


PacTool International SA90338 Gecko Gauge, LP Siding Installation Tool 1 Set

PacTool #ad - One-person installation - gauges and supports LP thick composite siding products for one-person installation with virtually no layout time. Use with lp siding products - use the SA90338 gecko gauge siding tool with 3/8” LP composite siding products. Patented friction-cam mechanism - supports full 16’ LP siding lengths. Won’t scratch or mar – gecko gauge won’t scratch or mar pre-painted siding. Adjustable – gauge is adjustable at 1/4” increments for 4”-8” siding reveals.
BrandPacTool #ad
ManufacturerGeneral Tools & Instruments #ad
Height3 Inches
Length11 Inches
Weight1 Pounds
Width7 Inches
Part NumberSA90338

4. Malco


Siding Removal Tool, 6 1/4 In, Red

Malco #ad - Manufacturer: Malco. Offset blade tip won't hang up in material. Mpn: srt2. One piece steel. Non-slip grip. Country of manufacture: United States.
BrandMalco #ad
ManufacturerMalco #ad
Height4 Inches
Length17 Inches
Weight0.01 Pounds
Width1 Inches
Part NumberSRT2
WarrantyAs Labeled



2 Pack Vinyl Siding Removal Tool for Installation and Repair, One-Piece Steel Zip Tool, Extra Long Non-Slip Grip Handle, Easy Removal of Vinyl Sidings Without Damaging Siding

IMPRESA #ad - These siding tools make siding removal quick and easy without causing damage to the siding or walls. You'll be able to remove the sidings from your house many times in one easy motion with this amazing tool. The best way to remove and install siding vinyl: this tool makes housing repair so easy and safe to perform that all other methods will be redundant.

Both extra-long handles are in the color blue. Longer tool for greater leverage: unlike other products on the market that have a shorter handle, ours has a 7 inch extra-long handle giving you extra leverage and added reach. Don't waste time and risk damaging your property using tools that aren’t fit for purpose. Perfect if you've got 2 people on the job or if you have a particularly stubborn bit of siding to remove.

Extra value pack of 2: ours is incredibly economical as it comes in a great value for money pack of 2. The essential tool for removing and installing siding: Set of high strength one-piece steel vinyl siding tools with non-slip grip. This zip tool does all the work! High quality metal built to last: made from a single piece of steel, this device is practically indestructible.
BrandIMPRESA #ad
ManufacturerImpresa #ad
Height0.75 Inches
Length7 Inches
Width1 Inches
Part Number5097

6. PacTool


PacTool SA907 Adjustable Z-Clamp Panel Siding Installation Tool 1 Set

PacTool #ad - Durable construction- steel body and clamp for long-term use. Safer & easier installation- easily and securely Clamps to z-flashing, providing a stable ledge for panel siding to rest on. Accurate- consistent gaps between panel and flashing every time. Adjustable - To any flashing or panel thickness. Install panel siding- working as a pair, the z-clamp acts as a platform for panel siding while nailing.
BrandPacTool #ad
ManufacturerGeneral Tools #ad
Height2.5 Inches
Length6 Inches
Weight2.75 Pounds
Width2.5 Inches
Part NumberSA907
Warranty1 Year

7. Norske Tools


Norske Tools NMAP004 13 inch Laminate Flooring & Siding Cutter with Sliding Extension Table with Bonus Floor Installation Kit Great Value

Norske Tools #ad - Cuts a variety of material, including laminate flooring, cemplank, fiber cement board HardiePlank, engineered wood and vinyl siding up to 13” wide and 19/32” thick.

Laser etched table miter gauge for angled cuts. Heavy duty 22” aluminum fence and reinforced table top for added strength and durability. 13" cutting capacity. Adjustable measuring gauge for quick repetitive cut. 28-1/2" handle for increased leverage. Bonus accessory kit includes pull bar, tapping block, 16 PVC inserts and mallet $30 value. Sliding extension table supports longer boards 41" Working length. Quiet and dust free! Includes 13” high speed steel blade.
BrandNorske Tools #ad
ManufacturerNorske Tools #ad
Height3.5 Inches
Length29 Inches
Width15 Inches
Part NumberNMAP004
WarrantyNo Guarantee

8. Bullet Tools


Bullet Tools, ES00-2009 9 inch EZ Shear Sharpshooter 2.0 Laminate Flooring & Siding Cutter, 1 Year Warranty

Bullet Tools #ad - Make cuts up to 9 inch. Dust free, quiet operation, no electricity - Cut where you work anytime day or night. One shear blade outlasts 10 or more saw blades. Wide and 9/16 inch. No assembly required - ready to use. Thick. Cut materials up to 9 inches in width. Max rake/angle - 45 degrees on 6 inch board.
BrandBullet Tools #ad
ManufacturerGunntech Manufacturing, Inc. #ad
Height12 Inches
Length11 Inches
Width23.5 Inches
Part NumberES00-2009
Warranty1 Year Warranty

9. Diablo by Freud


Freud D0704DH Diablo 7-1/4"x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor

Diablo by Freud #ad - The product is 7-1/4x4T Cement Blade. The product is manufactured in China. Easy to use. The pcd triple chip design offers up to 60-times longer cutting life than standard carbide blades, Imported. The only approved james Hardie polycrystalline diamond PCD tipped fiber cement saw blade.
BrandDiablo by Freud #ad
ManufacturerFreud #ad
Height12 Inches
Length1 Inches
Weight0.8 Pounds
Width10 Inches
Part NumberD0704DH
WarrantyFreud's Limited Lifetime Guarantee

10. Malco


Malco FCFG 5-Inch to 8-Inch Exposure Fiber Cement Siding Facing Gauge

Malco #ad - Can be used with FCG2 overlap gauge for one person installations. Easily held with one hand while steadying new plank for nailing. Adjustable for use on 5, 6, 7, and 8 inch exposures. Made from durable weather resistant nylon. More accurate and easier to use than home made wooden blocks.
BrandMalco #ad
ManufacturerMalco Products #ad
Height1.5 Inches
Length21.75 Inches
Weight0.3 Pounds
Width4.5 Inches
Part NumberFCFG
WarrantyLimited Lifetime