Top 10 Titanium Drill Bit Set Metric – Masonry Drill Bit Sets

As an Amazon Associate I earn from qualifying purchases.

1. Wrightus

#ad

13 PCS Metric M35 Cobalt Steel Twist Drill Bit Set HSS Extremely Heat Resistant with Straight Shank to Cut Through Hard Metals Like A Hot Knife Through Butter,Such as Stainless Steel,Titanium Alloy

#ad
Wrightus #ad - Twist drill bit kit Will not "walk" or "wander". No center punch is needed—the 135° quick-cut points are self-centering and penetrate quickly with less pressure. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.

Metal cutting — drilling steel, stainless steel and cast iron, although they can be used for softer materials, Stainless Steel, Hard Metal and Iron. Particularly successful in cutting through hard metals such as hard metal, too. Faster cutting and longer life— our twist drill bit hss are manufactured from m35 cobalt steel, for much faster cutting and extra longer life span, measuring Rockwell hardness up to 67, with molybdenum and cobalt added to creates a hardened alloy, with up to 12 times when compared with an average HSS drill bit.

Extremely heat resistant — twist drill bits must be used and operated at 1500 RPM or greater for maximum efficiency. Easy usage and store —the set includes 13pcs of m35 cobalt steel twist drill bits: 1. 5mm, 2mm, 3mm, 5.5mm, 2. 5mm, 3. 5mm, 4. 5mm, 6mm, 6.
BrandWrightus #ad
ManufacturerWrightus #ad
Part Number1

2. STROTON

#ad

Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal 1mm-10mm/19pcs

#ad
STROTON #ad - Premium m42 8% cobalt steel, 68-70 hrc rockwell Hardness Scale, usually give the best heat, Wear and Chip Resistance and Long Tool Life. This cobalt drill bit is typically capable of running three to five times Faster.

Despite the higher price, the cost per hole when Using Cobalt Drill Bit Will be the Lowest, Since It Can Produce So Many More Holes. The sufficiently sharp bit edge can cut the metal Material into Long Strips of Iron Chips rather than Slowly Grinding Throng the Material with a Blunt Drill Bit. 19pcs 135 degree split point drill bits includes :1mmlength:3. 4cm 1. 5mm 2mm 2. 5mm 3mm 3. 5mm 4mm 4. 5mm 5mmlength:8. 5cm 5. 5mm 6mmlength:9cm 6. 5mm 7mm 7. 5mm 8mmlength:11. 5cm 8. 5mm 9mm 9. 5mm 10mmlength:13cm DIA 05mm Increments.
BrandSTROTON #ad
ManufacturerSTROTON Ltd #ad
Part NumberM42 Cobalt-8(19pcs)
Model.

3. LSLANSOON

#ad

4241 HSS 135° Tip Metric Drill Bits Size from 1.0-10mm for Metalworking, Plastic Hole Drilling, Woodworking, 230 Pcs Titanium Coated Twist Drill Bit Set

#ad
LSLANSOON #ad - Along with a plastic Case to keep drill bits organized while not in use. Twist design: precise 135o Split Point drill bit ensures clean & accurate hole drilling.

Multi-purpose: great tools for drilling holes in soft metal, fiberglass, wood, plastic, etc. Sharp & wear-resistant: these drill bits are made of 4241 high speed steel with titanium coating for proven capability and durability. 230 pcs drill bit set: including 32 piece 1mm, 6 piece 6. 5mm, 2 piece 8. 5mm, 3 piece 8mm, 12 piece 4. 5, 30 piece 2. 5mm, 12 piece 5mm, 20 piece 3mm, 4 piece 6mm, 1 piece 9.5, 8 piece 5. 5mm, 5mm, 30 piece 2mm, 30 Piece 1.5mm, 12 piece 4mm, 20 Piece 3. 5, 1 piece 9mm, 4 piece 7mm, 2 Piece 7, 1 Piece 10mm.
BrandLSLANSOON #ad
ManufacturerLIYOU #ad
Part NumberTD230

4. LSLANSOON

#ad

99 Pcs Titanium Coated Twist Drill Bit Set, Plastic Hole Drilling, Woodworking, 4241 HSS 135° Tip Metric Drill Bits Size from 1.5-10mm for Metalworking

#ad
LSLANSOON #ad - Sharp & wear-resistant: these drill bits are made of 4241 high speed steel with titanium coating for proven capability and durability. Multi-purpose: great tools for drilling holes in soft metal, plastic, wood, fiberglass, etc.

99 pcs drill bit set: including 16 pcs 1. 5mm bits, 15 pcs 2. 5mm bits, 2 pcs 6. 5mm bits, 2 pcs 6. 0mm bits, 3 pcs 4. 5mm bits, 3 pcs 5. 0mm bits, 2 pcs 8. 0mm bits, 10 pcs 3. 0mm bits, 16 pcs 2. 0mm bits, 2 pcs 5. 5mm bits, 8 pcs 4. 0mm bits, 8 pcs 3. 5mm bits, 10 pcs 3. 2mm bits, 2 pcs 100mm bits. Twist design: precise 135o Split Point drill bit ensures clean & accurate hole drilling. Along with a plastic Case to keep drill bits organized while not in use.
BrandLSLANSOON #ad
ManufacturerLIYOU #ad
Part NumberST-99

5. AYQWE

#ad

3-in-1 Tap Drill Bits for Drilling, Titanium Combination Drill and Tap Bits Set, Tapping and Countersinking, 13pcs SAE/Metric Drill Tap Bits Set with Quick Change Adapter

#ad
AYQWE #ad - The surface is treated with titanium alloy, which is more wear-resistant and prolongs the service life. Each tap drill is engraved with its size, which is easy to use and store, improving work efficiency. Three-in-one function- the titanium alloy combination drill combines the three functions of drilling, aluminum, copper, brass, sheet metal and plastic at the same time, which can be used for wood, tapping and chamfering into one, greatly improving the work efficient.

High speed ​​steel material- the tap drill is made of high quality high speed steel, which greatly improves the cutting performance of the drill bit, which is strong and durable. Back taper over tap to prevent overdrilling and damage to threads.

The hex shank has a tapered end to prevent over-tapping. Sae/metric drill tap bits set- it includes 6 sae sizes 6-32nc, 6 metric dimensions m3 x 05, 8-32nc, 10-24nc, 12-24nc, ¼-20nc, 10-32nc, m5 x 0.8, m4 x 07, m8 x 12. 5, m6 x 1. 0, m10 x 1. 5 for tapping various threads. Easy to use- this tap drill set comes with a portable storage box and 1 quick change adapter.
BrandAYQWE #ad
ManufacturerAYQWE #ad
Part NumberAYQWE

6. HYMNORQ

#ad

Straight Shank and Convinient Index Case for Wood Plastic and Soft Metal Sheet, Hymnorq 1.0 to 10mm Metric Jobber Twist Drill Bits Set of 19pcs Titanium Coated HSS 4241

#ad
HYMNORQ #ad - Enough for daily use. 19pcs of metric twist drill bits in index case - 1. 0mm, 6. 5mm, 2. 5mm, 2. 0mm, 7. 0mm, 9. 5mm, 7. 5mm, 1. 5mm, 5. 5mm, 6. 0mm, 3. 5mm, 8. 5mm, 4. 5mm, 9. 0mm, 4. 0mm, 3. 0mm, 5. 0mm, 8.

0mm, 100mm. Usage - mainly used for drilling wood and plastic, occationally for drilling soft metal like aluminium. Economic choice for home DIY, building and engineering use etc. Satisfaction guaranteed - here at migiwata we only care about your satisfaction. Straight shank and 118° point angle - straight shank for standard drill chucks and collet chuck to hold firmly, assuring accurate centering; Helical flute for swarf to easily get out; standard 118-degree point configuration is ideal for general purpose drilling applications.

Hss 4241 - made of high speed steel 4241 and coated with titanium for rust prevention. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
BrandHYMNORQ #ad
ManufacturerHymnorq #ad

7. Tortoiseshell

#ad

51-Piece Metric Index Drill Bit Set, 1.0-6.0 mm in 0.1 mm Increments, HSS with Titanium Nitride TiN Coating

#ad
Tortoiseshell #ad - For drilling holes in wood, metal, 3D printed parts, walls, plastics, etc. 1. 0 to 6. 0 mm metric index drill Bit Set 01 mm increments, 51 Pieces. Hss drill bits with Titanium Nitride TiN Coating. Includes all-metal container with labeled storage for each drill bit. 118 degree twist bits, suitable for all-purpose drilling.
BrandTortoiseshell #ad
ManufacturerTortoiseshell Industrial #ad
Part Numbermswkx-fpsf-cf3168
Modelmswkx-fpsf-cf3168

8. HYMNORQ

#ad

Hymnorq Metric 1.0-10 mm Straight Shank M35 Grade Cobalt Steel Jobber Length Twist Drill Bits Set of 19pcs for Metals, Packed in Indexed Metal Case

#ad
HYMNORQ #ad - Well organized in a tough metal indexed storage case for easy transport to your worksite. Self centering - the 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure.

In most cases, including a RPM chart for several common metals, our customers would get a much better result with these tips. Not for hardened steel / high carbon steel. Downloadable user guide - we've summed up some tips of drilling metals, based on our reviews and some articles on the internet. 19pc metric set - the set includes 19pcs of m35 cobalt steel twist drill bits: 1mm, 8. 5mm, 1. 5mm, 4mm, 7. 5mm, 6mm, 5. 5mm, 9. 5mm, 3mm, 7 mm, 2mm, 9 mm, 8 mm, 6.5mm, 4. 5mm, 5mm, 3. 5mm, 2. 5mm, 10 mm. The bits will not "walk" or "wander". Try to adjust the RPM when it fails to penetrate.
BrandHYMNORQ #ad
ManufacturerHymnorq #ad
Height1.69 Inches
Length6.02 Inches
Width4.17 Inches
Part Number43398-50823
Model43398-50823

9. Makita

#ad

Makita B-49373 75 PC Metric Drill and Screw Bit Set

#ad
Makita #ad - Includes 3 phillips, 3 pozidriv, 2 slotted, 4 torx, and 4 hex power bits. Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications. Includes 4 brad point wood drill bits with size range of 4 - 8 millimetre. Includes 19 titanium nitride coated high speed steel HSS tin metal and wood drill bits with size range of 1 - 8 millimetre. Includes 5 phillips, 5 Pozidriv, 5 Torx and 5 slotted insert bits.
BrandMakita #ad
ManufacturerMakita #ad
Height1.97 Inches
Length8.66 Inches
Weight2.2 Pounds
Width8.86 Inches
Part NumberB-49373
ModelB-49373

10. YAKAMOZ

#ad

Yakamoz 6Pcs 1/4" Hex Shank Titanium Drill Tap Combination Bit Set Screw Tapping Countersink Drill Bits Metric Thread M3-M10 Taps Tool

#ad
YAKAMOZ #ad - Made of hss 4341 material with titanium surface treatment ensure sharp cutting performance and retain strength, provide more wear-resistant and prolongs the service life.

1/4" hex quick-change shank fits most electric hand drill, bench drill, impact drill, electric screwdriver and other tap machines. Shank size: quick change 1/4" hex shank, m6, m4, m5, m8, taps bit Size: M3, taps bit tpye: metric, Taps Bit Tpye: Metric, M10. Each tap drill is engraved with the appropriate sizes for easy identification. A tapered end on hex shank can prevent excessive knocks and back taper exceeds the tap to prevent over-drilling and damage to the thread. 3-in-1 design provides hole drilling, aluminum, brass, deburring and countersinking for a quick and complete job on copper, tapping, sheet metal and plastic.
BrandYAKAMOZ #ad
ManufacturerYakamoz #ad
Height0.06 Inches
Length4.02 Inches
Width2.72 Inches
Part NumberGY0465