Top 10 WTX Track Clamp – Clamps

As an Amazon Associate I earn from qualifying purchases.

1. Bora

#ad

Bora Saw Guide System Track Clamps – Two Pack, Saw Guide Accessory for Woodworkers, Carpenters, DIYers, Use to Cut Any Angle with the Bora WTX and NGX Saw Guide Systems, 542011

#ad
Bora #ad - Fast, accurate, easy, and repeatable: these clamps will make cutting angles fast, and accurate with your Bora WTX or NGX Saw Guide. Easily adjusts: use the fast-acting lock nut by simply pushing the bottom into the side, then release and turn to tighten.

Help speed up cutting down panel material such as plywood or MDF. Hold cutting stops: when making blind cuts the Track Clamps can be used to hold stops in place. These add additional versatility to the WTX and NGX Saw Guides. Cut any angle: the bora track clamps are designed to work with the Bora WTX and NGX Saw Guide System allowing you to cut virtually any angle. Sold as set: the Bora Track Clamps come as a pair. Non-marking grip: rubberized feet on the track clamps give a sold non-marking grip on your material.
BrandBora #ad
ManufacturerBora Portamate #ad
Height1 Inches
Length14 Inches
Width7 Inches
Part Number542011
Model542011
Warranty1 year

2. Bora

#ad

Bora 50" NGX Clamp Edge, 544050, Straight Cut Guide For Circular Saws | 50" Cutting Length

#ad
Bora #ad - By adding the bora NGX 50-inch aluminum extension. Easily increase length up to 100 in. Clamping end moves with handle for easy adjustability from one side. Made of heavy-gauge, rigid aluminum for extreme durability. Winner of the 2019 pro tool innovation Award PTIA in the Track Rail category. Locking handle grabs work surfaces for a secure grip that won’t budge.
BrandBora #ad
ManufacturerBora #ad
Height2 Inches
Length58 Inches
Width3 Inches
Part Number544050
Model544050
Warranty1 year

3. Bora

#ad

545050, Carpenters and DIY, Contractors, Guide for Circular Saws, Bora 50” WTX Ruled Clamp Edge Saw Guide for Woodworking, 50 Inch Cutting Length

#ad
Bora #ad - Additonal accessories: the bora wtx saw guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide. Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy.

With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.

50 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge. It’s long 50-inch length allows you to saw with precision and skill. The locking handle grabs surfaces for a secure edge that won't budge while you cut. Suited for your needs: the modular design allows for additional extensions to be added to expand your cutting length up to 100 inches.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height1.5 Inches
Length62.2 Inches
Width3 Inches
Part Number545050
Model545050
Warrantyone year limited

4. Bora

#ad

100 Inch Cutting Length, Contractors, Guide for Circular Saws, Carpenters and DIY, Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, 545100

#ad
Bora #ad - Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. The locking handle grabs surfaces for a secure edge that won't budge while you cut. With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts.

Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. Suited for your needs: the modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. 100 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts.

It’s long 100-inch length allows you to saw with precision and skill. Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy. Additonal accessories: the bora wtx saw guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height1.38 Inches
Length62.75 Inches
Width3 Inches
Part Number545100
Model545100

5. Bora

#ad

543050, Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length

#ad
Bora #ad - The locking handle grabs surfaces for a secure edge that won't budge. Its long 50in length allows you to saw with precision and skill. Locked in - the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.

With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Get it straight – this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Contractor’s companion - this tool is made for use with the Bora WTX Saw Plate sold separately, and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools. As long as you need – modular design allows for additional extrusions to be added which can expand the guide up to 100 inches.
BrandBora #ad
ManufacturerAffinity Tools #ad
Height1.5 Inches
Length62.75 Inches
Weight1.5 Pounds
Width3 Inches
Part Number543050
Model543050

6. Bora

#ad

Bora Jigsaw Guide For WTX or NGX Clamp Edge. Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009

#ad
Bora #ad - An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw. Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw.

Made for jigsaws - this jigsaw guide is specifically designed to fit most jigsaws. Easy to use - the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts. Adjustable pointer guide keeps cuts true. Solid design - with two "tongue and groove" Points that slide into the Bora clamp Edge's side grooves, it's a firm, steady guide for your Jigsaw.
BrandBora #ad
ManufacturerAffinity Tools #ad
Height2 Inches
Length8.5 Inches
Width5.5 Inches
Part Number542009
Model542009

7. Bora

#ad

543024, Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 24-Inch Cutting Length

#ad
Bora #ad - The locking handle grabs surfaces for a secure edge that won't budge. Get it straight – this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track.

With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Locked in - the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. Contractor’s companion - this tool is made for use with the Bora WTX Saw Plate sold separately, and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools. As long as you need – modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. Its long 24 inch length allows you to saw with precision and skill.
BrandBora #ad
ManufacturerAffinity Tools #ad
Height1.5 Inches
Length40 Inches
Weight4 Pounds
Width3 Inches
Part Number543024
Model543024

8. Bora

#ad

545036, Bora 36” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Guide for Circular Saws, 36 Inch Cutting Length, Carpenters and DIY

#ad
Bora #ad - Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts.

The locking handle grabs surfaces for a secure edge that won't budge while you cut. 36 inches of cutting: with your purchase you will receive a 36" WTX Clamp Edge. It’s 36-inch length allows you to saw with precision and skill. Additonal accessories: the bora wtx saw guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially plywood and sheet material.

Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy. Suited for your needs: the modular design allows for additional extensions of up to 50 inches to be added.
BrandBora #ad
ManufacturerBora #ad
Part Number545036
Model545036

9. Bora

#ad

Bora 50” Ruled WTX Clamp Edge Extension for WTX Clamp Edge Saw Guide for Woodworking, 545060, Contractors, 50 inch Extension, Carpenters and DIY

#ad
Bora #ad - Extend your cutting capacity: with the 50 inch wtX Clamp Edge Extension you will get another 50 inches of cutting capacity to add to any length Bora WTX Clamp Edge.

It’s 50-inch length allows you to saw with precision and skill up to 100 inches when paired with the 50-inch WTX Clamp Edge. Get it straight every time: this rigid aluminum guide extension is a must-have accessory for keeping your cutting on track. Make measuring easy: a ruled edge with both metric and imperial measurements make your job of getting perfect cuts quick and easy. Compatible with bora wtx clamp edge: The WTX Extension is designed specifically to work with the Bora WTX Clamp Edge Saw Guides.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height52 Inches
Length0.63 Inches
Width3 Inches
Part Number545060
Model545060
Warrantyone year limited

10. Bora

#ad

24 Inch Cutting Length, Guide for Circular Saws, Bora 24” WTX Ruled Clamp Edge Saw Guide for Woodworking, 545024, Contractors, Carpenters and DIY

#ad
Bora #ad - Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy. It’s 24-inch length allows you to saw with precision and skill.

With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Additonal accessories: the bora wtx saw guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide. Suited for your needs: the modular design allows for additional extensions of up to 50 inches to be added. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially plywood and sheet material.

The locking handle grabs surfaces for a secure edge that won't budge while you cut. Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. 24 inches of cutting: with your purchase you will receive a 24" WTX Clamp Edge.
BrandBora #ad
ManufacturerBora #ad
Part Number545024
Model545024