Top 6 Center Finder Machinist – Edge Treatment & Grooving Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Mitutoyo


0.200" Diameter Tip, Edge/Center Finder, 3/8" Diameter Shank, Mitutoyo 050103

Mitutoyo #ad - Country of origin: United States. Used in a milling machine to find the workpiece edge. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. All working surfaces are hardened and ground.
BrandMitutoyo #ad
ManufacturerMitutoyo #ad
Height0.5 Inches
Length3.9 Inches
Weight0 Pounds
Width1.4 Inches
Part Number050103

2. Taytools


Taytools 469508 1-1/2 Inch Machinist Center Finder Square Tools Steel with Tapered Pinned Joint Overall Length 3-1/4 Inches

Taytools #ad - Length of the leg from the inside corner to tip is 1-1/2 inches, overall length is 3-1/4 inches. This center finder square is made from tool steel and lapped to a fine finish. Will find the center of a 3 inch square and a 3-1/2 inch circle. Overall thickness is 0390 inches. The joint is taper pinned to maintain accurate measurements.
BrandTaytools #ad
ManufacturerTaylor Toolworks #ad
Part Number469508

3. Taytools


Round, Octagon and Hexagon Stock up to 8”CF, Plastic Center Finder for Square

Taytools #ad - Find center of hexagons up to 5 ¾”. Find centers of circles, octagons and square up to 8”. Intersection is center. To use place on corner, scribe a line, rotate 90 degrees and strike a second line. Quickly find exact center of stock with no measurements. Clear impact resistant plastic for better visibility.
BrandTaytools #ad
ManufacturerTaylor Toolworks #ad
Weight0.15 Pounds
Part NumberCF

4. iGaging


IGaging Combination Square Premium 3-Piece 6" 4R Center Head

iGaging #ad - Etched, machine divided 4r graduations - 8ths, 16ths, 32nds & 64ths. Fully hardened and Tempered Steel Blade; Satin Chrome finish.
BrandiGaging #ad
ManufactureriGaging #ad
Weight1.05 Pounds
Part Number34-206-3

5. Fowler


Fowler 54-575-600-0 Electronic Edge Finder with .2" Cylindrical Tip

Fowler #ad - Measuring capabilities: this electronic edge finder has a 1/2" mounting shank with a repeatability of 00002". Accurate measurements: this electronic edge finder can read off any electrically conductive metal; it uses one 12V battery. Light ports: professional edge finder with six equally spaced light ports that provide visibility at any angle. Edge finder: edge detection tool with 02" stylus that lights instantly when it touches work edge and contact is made between 2 conductive surfaces.
BrandFowler #ad
ManufacturerFred V. Fowler Company, Inc. #ad
Weight0.04 Pounds
Part Number54-575-600-0

6. DFM Tool Works


DFM Small Square and Marking Center Finder Precision MADE IN USA Blue

DFM Tool Works #ad - Center marking hole Bottom is 1/16" diameter for consistent center mark. All components including pins Made in USA. Outer dimensions 2. 625" x 1. 625" x 0625". Center marking hole 11/32" 034" to allow larger pencils. Can be used as a Saddle Square to Transfer Lines.
BrandDFM Tool Works #ad
ManufacturerDFM Tool Works #ad
Height0.63 Inches
Length2.63 Inches
Width1.63 Inches
Part NumberDFM Small Square