As an Amazon Associate I earn from qualifying purchases.
1. Emerson Thermostats #ad
Emerson H150 Universal Ignitor #adEmerson Thermostats #ad
- Features large ignition area for easy installation and consistent ignition. For gas-fired forced-air furnaces, water heaters and boilers. Features universal mounting bracket to eliminate the need for multiple brackets.
Durable, nitride construction for most applications. Universal compatibility - replaces 150 common igniters covering almost 90% of applications.
2. MCAMPAS #ad
Boilers., Water Heaters, MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces #adMCAMPAS #ad
- Temperature at 120v ± 05v. 60hz at 17 sec ≧1180 ℃. This is a very versatile product, very robust with long cycle life. It works compatible with cook top, water, pool heater and boilers, Hot Surface Igniters, Cook Top and Range, special fx, Infrared light source, furnace and warm air movement, Process Machinery, Gas Ignition, and Parking Heaters Nitride heating element.
120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
Power rating:150 w. How to tell if your igniter is working， if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms, if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination. 1. 97" nitride heating element, 1. 18"ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
3. DURALIGHT #ad
1474-052P, and 025-41021-000, Duralight Ignitor Universal Replacement for Coleman Evcon Mobile Home Furnaces 1474-051P #adDURALIGHT #ad
- Universal replacement Part for Many Mobile Home Furnaces. Made in USA. Duralight Two Year Replacement Policy. Replaces coleman evcon part numbers: 1474-051, 1474-052, 025-41021-000, 1474-052p, 1474-051p, and S1-02441021000.
11-1/4" long insulated wires - includes high Temperature Ceramic Wire Nuts - Simply Strip Wires and Twist On.
4. Dinosaur Electronics #ad
Dinosaur Electronics UIB S Small Universal Ignitor Board #adDinosaur Electronics #ad
- Red to indicate power to gas valve. Diagnostic-aid led on board is green to show power to board. Size: 3. 25 x 4. 25 inches, fuse & Surge protected, Microcontrolled.
External sense -connector on the board for external sense wire. Dual sense - flame sense works through high voltage connector and edge connector simultaneously. Voltage regulator -cleans up the 12 Volt supply power.
5. Soobool #ad
Replaces 170 Common Igniters Covering Almost 90% of Applications. For Gas-Fired Forced-Air Furnaces, Water Heaters etc. 3-year warranty, Upgraded H150 Universal Silicon Nitride Hot Rod Ignitor OEM #adSoobool #ad
- If you do it can shorten the hot surface ignitor鈥檚 life. Please make sure you do not touch the gray glass part of the ignitor. Oem standard: h150 universal silicon nitride hot rod ignitor has been replaced by a more durable Silicon Nitride Igniter, different appearance, better quality, but same part number, ensuring the stable operation of the product during use.
Please contact us for the vedio if you need! isk-free shopping: what you buy is not only a product, I give you a satisfactory experience, you give me a trust, but also a whole set of our after-sales service, free replacement or full refund if you are not satisfied!.
Compatible models: nitride ignitors with 14.
5" and 15. 5" leads-stripped ends, universal and standard mounting brackets and 2 ceramic wire nuts, replaces most silicon carbide ignitors including many Carborundum models. Easy to install: it is very easy to install, you can fix this by yourself! We provide installation vedio. Fix the fault: furnace will not ignite, moisture, cracks in the igniter occur, lgnitor will not glow, lgnition burned out, breakage, etc.
6. DURALIGHT #ad
Duralight Furnace Hot Surface Ignitor Direct Replacement For Carrier Bryant Payne OEM Part LH33ZS004 #adDURALIGHT #ad
- Replaces part numbers: lh33zs001, lh33zs003, lh33zs002, and LH33ZS004. Includes two hi Temp Ceramic Wire Nuts. Duralight Two Year Warranty. Direct replacement part For Many Carrier, Payne, Bryant, and Day. Made in USA.
7. DURALIGHT #ad
Duralight Furnace Hot Surface Ignitor Direct Replacement For Goodman Amana Janitrol OEM Part B1401018 #adDURALIGHT #ad
- 90 degree mounting bracket and Two High Temp Wire Nuts Included. Replaces goodman - amana - janitrol Part Numbers B1401015 and B1401018. Made in USA. Will also work with Existing Snap-In Bracket. Duralight Two Year Warranty.
8. Supplying Demand #ad
Supplying Demand 903758 Gas Furnace Ignitor Replacement Model Specific Not Universal #adSupplying Demand #ad
- Please see model number fitment information at the bottom of this page before placing your order for this part. Features a plug in connection, but can be spliced if needing to fit or work for other units.
Be very careful when installing as these are fragile and can easily break. Sd products come in Supplying Demand packaging that includes helpful information should you have any issues.
18 gauge copper high temperature fiberglass insulated lead wires | igniter material: silicon carbide | steady-state current : 2. 9 to 5. 0 amps maximum @ 132 volts | resistance: 50 to 1100 ohms | time to temperature :
|Brand||Supplying Demand #ad|
|Manufacturer||Supplying Demand #ad|
|Warranty||All Supplying Demand products come with a 60-day money back guarantee and 1-year warranty. The order can be returned within 60 days in its original condition for a full refund or replaced within 1 year after providing a compatible model and serial number.|