As an Amazon Associate I earn from qualifying purchases.
Songhe #ad - Working voltage: 3. 3v～5v. Digital interface type: IIC slave mode or PWM. Temperature measurement error: ±05℃ at room temperature resolution 002℃. Temperature measurement range: -70℃～382. 2℃. Operating environment temperature -40～125℃.
HiLetgo #ad - As a standard, the 10-bit pwm is configured to continuously transmit the measured temperature in range of -20 to 120°C, with an output resolution of 014°c.
The user can configure the digital output to be pulse width modulation PWM. Both the ir sensitive thermopile detector chip and the signal conditioning ASIC are integrated in the same TO-39 can. The thermometer comes factory calibrated with a digital SMBus output giving full access to the measured temperature in the complete temperature ranges with a resolution of 002°c.
XYG-Module #ad - Measures the surface temperature of an object without touching it, depending on the emitted IR waves of the target, Also measures the average temperature over an area. Part number: Infrared Temperature Sensor.
AITRIP #ad - Integrated into the mlx90614 are a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.
Integrated into the mlx90614 are a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer. Package included: 2* mlx90614 Infrared Temperature Sensor Module.
EC Buying #ad - The mlx90614 integrates a low noise amplifier, a 17-bit ADC and a powerful DSP unit, so the thermometer has both high precision and high resolution. The to-39 metal package integrates the infrared induction thermopile detector chip MLX81101 the temperature is measured by PTC or PTAT element and the signal processing dedicated integrated chip MLX90302, which is specially used to process the infrared sensor output signal.
Introduction: the mlx90614 is an infrared thermometer sensor for non-contact temperature measurement. Advantages: ①small size and low cost ②easy to integrate ③temperature measurement range: -70 to 380°c ④accuracy up to 05°c in a wide temperature range temperature measurement error: ±05°c at room temperature ⑤ sensor temperature: -40 to 125°C use ambient temperature ⑥Measurement resolution is 002°c ⑦with m3 fixing screw holes, easy to install and fix.
The mlx90614 non-contact infrared sensor module can be output through a two-wire smbus system management bus compatible protocol interface IIC compatible 002°c resolution or a 10-bit PWM pulse width modulation output mode.
EC Buying #ad - Output method: ①4-digit voltmeter directly reads the temperature value ②Serial port output obtain data from the computer serial port assistant through USB to TTL. Measuring distance: 5-15cm accuracy: ±05°c room temperature range Resolution: 001℃.
Hailege #ad - The user can configure the digital output to be pulse width modulation PWM. As a standard, the 10-bit pwm is configured to continuously transmit the measured temperature in range of -20 to 120°C, with an output resolution of 014°c.
1. Songhe
#adSonghe GY-906 MLX90614 MLX90614ESF Non Contact IR Infrared Temperature Sensor Module IIC I2C Serial for Arduino
#adMore information #ad
| Brand | Songhe #ad |
| Manufacturer | Songhe #ad |
| Height | 0.2 Inches |
| Length | 0.67 Inches |
| Width | 0.51 Inches |
| Part Number | GY-906 |
| Model | GY906 |
| Warranty | no |
More information #ad
2. HiLetgo
#adHiLetgo GY-906 MLX90614ESF Non-Contact Infrared Temperature Sensor Module IIC I2C Serial for Arduino
#adThe user can configure the digital output to be pulse width modulation PWM. Both the ir sensitive thermopile detector chip and the signal conditioning ASIC are integrated in the same TO-39 can. The thermometer comes factory calibrated with a digital SMBus output giving full access to the measured temperature in the complete temperature ranges with a resolution of 002°c.
More information #ad
Mlx90614 is an infrared thermometer for non-contact temperature measurements. Integrated into the mlx90614 are a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
| Part Number | 3-01-1294 |
| Model | 3-01-1294-AU-1PC |
More information #ad
3. XYG-Module
#adContact-Less Infrared Temperature Sensor IR Module High Precision High Resolution Fast Response 3.3V/5V @XYGStudy
#adMore information #ad
Calibrated before delivery, with gradient temperature compensation. Contact-less infrared template sensor. Contact-less, high precision, high resolution, fast response. Works with 3. 3v/5v mcu system directly, thanks to the built-in level translation.| Brand | XYG-Module #ad |
| Manufacturer | XYG-Module #ad |
More information #ad
4. AITRIP
#adAITRIP 2 Pieces GY-906 MLX90614ESF Non-Contact Infrared Temperature Sensor Module IIC I2C Serial Power Supply 3-5 V Compatible with Arduino
#adIntegrated into the mlx90614 are a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer. Package included: 2* mlx90614 Infrared Temperature Sensor Module.
More information #ad
Working voltage：3. 3-5v working temperature rang：from -40 to +125 ℃. As a standard, the 10-bit pwm is configured to continuously transmit the measured temperature in range of -20 to 120°C, with an output resolution of 014°c. The user can configure the digital output to be pulse width modulation PWM.| Brand | AITRIP #ad |
| Manufacturer | AITRIP #ad |
| Part Number | EC169691 |
More information #ad
5. PartsBeiz
#adMLX90614ESF-DCI Sensor Module MLX90614 Infrared Temperature Sensors GY-906-DCI IIC Connector Long Distance Electronic DIY PCB
#adPartsBeiz #ad - Mlx90614esf-dci sensor module mlx90614 infrared temperature sensors GY-906-DCI IIC Connector Long Distance Electronic DIY PCB.More information #ad
| Brand | PartsBeiz #ad |
| Manufacturer | PartsBeiz #ad |
| Part Number | YZWMfzl_10984 |
More information #ad
6. EC Buying
#adEC Buying GY-906 MLX90614 Non-Contact IR Infrared Temperature Sensor Module IR Temperature Acquisition Module High Precision High Resolution Infrared Temperature Sensor IIC Serial Port for Arduino
#adIntroduction: the mlx90614 is an infrared thermometer sensor for non-contact temperature measurement. Advantages: ①small size and low cost ②easy to integrate ③temperature measurement range: -70 to 380°c ④accuracy up to 05°c in a wide temperature range temperature measurement error: ±05°c at room temperature ⑤ sensor temperature: -40 to 125°C use ambient temperature ⑥Measurement resolution is 002°c ⑦with m3 fixing screw holes, easy to install and fix.
More information #ad
The temperature range of the mlx90614 is calibrated at the factory, and the temperature measured by the sensor is the average temperature of all objects in the field of view. Application : high precision non-contact measurement temperature comfort sensor for car air conditioning control system Air conditioner temperature sensing element for commercial and industrial buildings Windshield Anti-Fog Application Industrial moving element temperature control Printer temperature control Home appliance temperature control Multi-zone temperature control - two-wire communication can support up to 100 sensors Thermal relay/alarm Body temperature measurement. The mlx90614 non-contact infrared sensor module can be output through a two-wire smbus system management bus compatible protocol interface IIC compatible 002°c resolution or a 10-bit PWM pulse width modulation output mode.
| Brand | EC Buying #ad |
| Manufacturer | EC Buying #ad |
| Part Number | EC Buying#62425 |
More information #ad
7. EC Buying
#adEC Buying MLX90614 Non-Contact Infrared Temperature Measurement Sensor Module Temperature Acquisition Sensor Directly Display Temperature/with Digital Display
#adMore information #ad
Basic product info: name: mlx90614 non-contact infrared temperature sensor Power supply: 5V Size: 38mm X 15mm X 18mm LXWXH Main chip: sensor MCU power supply. Measurement target temperature: :-70℃~+125℃ Ambient temperature: -40℃~+125℃. At command: aT+T read temperature value.| Brand | EC Buying #ad |
| Manufacturer | EC Buying #ad |
| Part Number | EC Buying#79465 |
More information #ad
8. Hailege
#adHailege MLX90614 Non-Contact Infrared Temperature Sensor Module GY-906 IIC I2C 3-5V for Arduino 51 MCU Raspberry Pi
#adMore information #ad
Integrated into the mlx90614 are a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer. Mlx90614 gy-906 non-contact Infrared Temperature Sensor Module. Both the ir sensitive thermopile detector chip and the signal conditioning ASIC are integrated in the same TO-39 can.| Brand | Hailege #ad |
| Manufacturer | Hailege #ad |
| Part Number | H-A-1294 |
More information #ad
