Top 9 All-in-One Drop-in Stainless Steel 15 In. 2-hole Single Bowl Bar Sink – Bar & Prep Sinks

As an Amazon Associate I earn from qualifying purchases.

1. HOUZER

#ad

Houzer 1515-6BS-1 Hospitality Series Topmount Stainless Steel 2-Holes Bar/Prep Sink

#ad
HOUZER #ad - 2 holes. Fits 18" cabinet. Overall size 15" x 15", bowl 12. 125" x 10125" x 6" deep. Super-silencer pad. 24 gauge t-304 stainless steel.
BrandHOUZER #ad
ManufacturerHouzer #ad
Height15 Inches
Length15 Inches
Weight5.2 Pounds
Width6 Inches
Part Number1515-6BS-1
Model1515-6BS-1
WarrantyLifetime Warranty Against Defects in Materials and Workmanship

2. WEWE

#ad

WEWE Single Handle High Arc Brushed Nickel Pull Out Kitchen Faucet,Single Level Stainless Steel Kitchen Sink Faucets with Pull Down Sprayer

#ad
WEWE #ad - Easy to install-pull down hose and water line hose altogether preinstalled in kitchen faucet to save much time under the sink, no require plumber, finish DIY installation less than 30 minutes.

Easy to maintenance-superior corrosion & rust-resistant finish prevent dirty from sticking to faucet surface, clean faucet by cloth is enough in Daily Use. Multifunctional outlet water effect-3 way spray settingSTREAM, spray for rinsing, SPRAY, PAUSE, stream for filling water, pause for avoiding splashing in multitask mode. Sleek design-tulip kitchen faucet design make your kitchen room simple and fresh, easy to match most sink. Easy to operate-single handle control water temperature and flow volume easily, high arc 360 degree swivel spout supply full range washing access, sprayer head always retract back to spout after each use.
BrandWEWE #ad
ManufacturerAonecer #ad
Height3.15 Inches
Length22.7 Inches
Weight5.1 Pounds
Width11 Inches
Part Number3T01L
ModelA1001-02-01BN
Warranty5 Years

3. Kindred

#ad

Size, FBFS602NKIT, KINDRED Stainless Steel, Essentials All-in-One Kit 15 x 6-inch Deep Drop-in Bar or Utility Sink in Satin

#ad
Kindred #ad - Chrome finish bar faucet and drain included. Limited Lifetime. Flawlessly suited for a bar, laundry or utility room. Safe and easy installation Template and hardware included. 22 gauge stainless steel construction for top mount installation.
BrandKindred #ad
ManufacturerFranke USA #ad
Height15 Inches
Length15 Inches
Weight6.5 Pounds
Width15 Inches
Part NumberFBFS602NKIT
ModelFBFS602NKIT
WarrantyLimited Lifetime Buyer Warranty

4. Elkay

#ad

Elkay D115151 Dayton Single Bowl Drop-in Stainless Steel Bar Sink

#ad
Elkay #ad - Drain opening: Sink drain opening measures 2". 300 series stainless steel: Designed for everyday use. Minimum cabinet Size:18 inch.

Made in the usa: this Elkay product is proudly made in the USA. Quiet: sound-deadening pads minimizes sound and vibration for a quieter time at the sink. U-channel installation: Mounting clips placed inside the channel before installation mean less time under the sink for an easier install. Ada compliant: Product is ADA compliant when properly installed. Drop-in installation: sink is designed for drop-in installation to make the sink a focal point of your room.
BrandElkay #ad
ManufacturerElkay #ad
Height5.2 Inches
Length15 Inches
Weight2 Pounds
Width15 Inches
Part NumberD115151
ModelD115151

5. ZUHNE

#ad

Bar and RV Stainless Steel Sink 15x15 Small Sink, ZUHNE Drop In Kitchen

#ad
ZUHNE #ad - Protect your cabinets features sound pads and thermal insulation coating so that you can flush ice or defrost frozen items in the sink without condensate damage to sink cabinetry. Safest choice certified to us and canada codes – compatible with garbage disposal - Daily product support from US call center – Zuhne is BBB A+ rated and Inc5000 fastest growing American owned and operated brand.

Rust proof stainless sink impact and scratch resistant 18/10 t304 steel inside out – designed to handle heavy cast irons or hot pans directly from the oven.

Top mount kitchen sink one hole overmount deck for easy retrofit install on any countertop incl laminate and butcher block – drill additional holes without voiding warranty. Easiest sink to maintain same brushed finish as premium kitchen appliances with easy clean curved corners and sloped base to drain and dry faster - gentle wipe keeps sink sparling forever.
BrandZUHNE #ad
ManufacturerZuhne #ad
Height6 Inches
Length15 Inches
Weight6 Pounds
Width15 Inches
Part NumberFortuna 15
ModelFortuna15
WarrantyLifetime Limited (Sink)

6. Ruvati

#ad

RVH8051, Ruvati 33-inch Drop-in Low-Divide Tight Radius 50/50 Double Bowl 16 Gauge Topmount Kitchen Sink

#ad
Ruvati #ad - Standard 33" x 22" dimension - will RETROFIT into most existing drop-in sink cutouts. Included in box: sink, cutout template, basket strainer drain assembly, Bottom Rinse Grid, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA.

Heavy duty soundguard undercoating and thick rubber padding to minimize noise and reduce condensation | SLOPED bottom with DRAIN GROOVES to allow complete water drainage | edgeX 10mm Tight Radius - Ruvati's unique 10mm radius inside corners offer a slightly curved corner for easy cleaning while at the same time retaining the resolutely modern look. Topmount installation: 1-inch wide and 1/4-inch high rim all around for a solid overmount look | 16 GAUGE thick premium T-304 grade stainless steel 18/10 Chromium/Nickel - 37% thicker than most standard kitchen sinks.

Exterior dimensions: 33" wide x 22" front-to-back | interior dimensions: 15" x 18" left, 15" x 18" right x 10" bowl depth | Standard 3. 5" drain openings will fit any garbage disposal unit | Comes pre-drilled with 2 holes for faucet and soap dispenser installation. Unique low divide design: divider between two bowls is 4" lower, giving you extra clearance when you are washing dishes | Commercial grade BRUSHED FINISH - Easy to clean and long-lasting.
BrandRuvati #ad
ManufacturerRuvati #ad
Height16 Inches
Length37 Inches
Width27 Inches
Part NumberRVH8051
ModelRVH8051

7. Ruvati

#ad

Ruvati 15 x 15 inch Drop-in Topmount Bar Prep Sink 16 Gauge Stainless Steel Single Bowl, RVH8115

#ad
Ruvati #ad - Topmount installation: ultra-thick 8 gauge rim for a solid overmount installation; rest of the sink is of 16 gauge thickness | Premium T-304 Grade Stainless Steel 18/10 Chromium/Nickel will never rust or stain.

Luxurious brushed finish - matches stainless steel appliances and hides scratches | Sloped bottom with grooves to allow complete water drainage. Exterior dimensions: 15" wide x 15" front-to-back | interior dimensions: 13" wide x 11" front-to-back x 9" bowl depth | Standard 3. 5" drain opening will fit any garbage disposal unit. Heavy duty sound guard padding and undercoating to minimize noise | Zero Radius - sharp inside corners for a resolutely modern look. Included in box: sink, basket strainer drain, cutout Template, Bottom Rinse Grid, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA.
BrandRuvati #ad
ManufacturerRuvati #ad
Height9 Inches
Length15 Inches
Width15 Inches
Part NumberRVH8115
ModelRVH8115

8. IKEBANA

#ad

Kitchen Sink,Bar Sink,Handmade Stainless Steel Brushed Nickel Prep Small Sink,15 x 15 Inches 18 Gauge Single Bowl Workstation Overmount Laundry Outdoor Sink With Accessories

#ad
IKEBANA #ad - Texture of material:premium 304 stainless steel material, scratch resistant commercial grade premium satin finish, resistant to dents and scratches, Suitable for all counter top.

New design make the sink look more beautiful and simple. Modern and concise design offer you a brand new visual experience & makes the sink more clean and tidy. Sink dimension inch : 15" x 15" x 10", 18 gauge 304 stainless Steel Satin Brushed Nickel Finished. A standard 3. 5" stainless steel drainassembly. Strong guard coating:ikebana sinks are full-body coating with cushioning pads. Extra-thick dampening:3mm extra thick rubber Pads Cover Most of the Sink’s Surface, Assuring Exceptional Noise Reduction and Quiet Dependability. Maintaining water temerature and preventing condensate formation that can protect wooden cabinets.
BrandIKEBANA #ad
ManufacturerIKEBANA #ad

9. Elkay

#ad

Dayton D115162 Single Bowl Drop-in Stainless Steel Bar Sink

#ad
Elkay #ad - U-channel installation: Mounting clips placed inside the channel before installation mean less time under the sink for an easier install. Ada compliant: Product is ADA compliant when properly installed. Made in the usa: this Elkay product is proudly made in the USA. 300 series stainless steel: Designed for everyday use. Sink dimensions: 15" x 15" x 5-3/16" Min. Cabinet Size: 18". Drop-in installation: sink is designed for drop-in installation to make the sink a focal point of your room. Quiet: sound-deadening pads minimizes sound and vibration for a quieter time at the sink.
BrandElkay #ad
ManufacturerElkay #ad
Height5.2 Inches
Length15 Inches
Weight12 Pounds
Width15 Inches
Part NumberD115162
ModelD115162
WarrantyLimited lifetime.