Top 9 Amanda Tool Slot Cutter – Edge Treatment & Grooving Router Bits

As an Amazon Associate I earn from qualifying purchases.



Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK, CNC Spoilboard Surfacing Router Bit, 1/4" Shank 1-1/2" Cutting Diameter

BINSTAK #ad - Industrial grade cnc wood router bit: Super-strength steel body with anti kickback design, 2 cutting blades. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside.

Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc. 2-wing insert cnc router bit: shank: 1/4"; cut diameter: 1-1/2" ; Carbide Inserts: 12*12mm. Used on soft and hard woods, particle board, MDF, acrylic and etc. Replace the carbide inserts when needed, instead of replacing the whole bit.

Cost-effective insert bit: the surfacing router bit utilizes 4-sided solid carbide inserts. This planer router bit is perfect for wood slabs flattening, laminate, plywood compact panel, resurface or plane the top surface of the spoilboard. Cost effective solution compared to brazed router bits and solid carbide spiral bits. 2-wing design, resulting in a more balanced tool while running.
BrandBINSTAK #ad
ManufacturerBINSTAK #ad
Part Number1/4 insertRB 1-1/2inch



Yakamoz 1/4 Inch Shank 3-Wing Adjustable Slot Cutter Router Bit Set with Bearings | 6-Picecs Slotting Cutting Blades, 1/2 Inch Cutting Depth, 6 Different Cutting Widths

YAKAMOZ #ad - Shank size: 1/4", cutting diameter:1-7/8", cutting Depth:1/2", Bearing Outer Diameter: 7/8". Designed for a router table or desktop woodworking engraving machine like cnc hand-held and table-mounted router.

6 different replacement slot cutters: 1/16", 1/8", 5/32", 3/32", 3/16" and 1/4" Cutting Width. Note: please clamp the shank in right place See Picture No. 4, mdf, or it may cause the shank getting bend. Industrial quality router bits with Anti-Kickback design and CNC balanced with high quality guide bearings. Suitable for solid wood, particleboard, plywood etc. Made of quality c3 micro-grain carbide, resin, with heat resistant teflon coating to prevent building-up of sawdust, and pitch. And the holder of the blades cannot use as a 1/4 shank, it should not be used on router machines.
BrandYAKAMOZ #ad
ManufacturerYakamoz #ad

3. meihejia


6 Size, Meihejia 1/4 Inch Shank Slot Cutter Router Bit Set

meihejia #ad - Suitable for softwood, mdf, particleboard, plywood, etc.6 sizes cutting thick: 5/64", 1/8", 3/32", 5/32", 3/16", 1/4". Useful for cutting a slot in wood or create grooves, great for joinery and other standard applications.

1/4 inch shank slot cutter router bit set. Create very smooth cuts. C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Heat resistant Teflon coating. Max cutting depth is 1/2 inch. Designed for the hand-held and table-mounted router, it can not be used in electric drill & drill machines. The blade is thin and not suitable for cutting high hardness wood! .
Brandmeihejia #ad
ManufacturerMeihejia #ad
Part NumberSR-74689

4. LoveDeal


With 6 Pcs Slotting Cutter Blades, 3 Teeth T Shape Molding Wood Milling Cutter, for Cabinet6 Sizes, LoveDeal 1/2 Inch Shank Slot Cutter Router Bit Set, Adjustable 3 Wings Carbide Woodworking Tool

LoveDeal #ad - Multifunction application - suitable for slotting and grooving in all woodworking projects; perfect for solid wood, laminate trimmers, MDF and plywood; use on hand-held routers, particleboard, and table-mounted portable routers;.

High precision grinding technology - help you make a clean, smooth and flawless woodwork. Anti-kick back design - prevent workshop mishaps, ensure a safer working environment. 6 different sizes slot cutter router bit set - with 1/2 inch shank, 3/32", 1/8", 5/32", 6 sizes cutting thick: 1/16", the cutting depth is 1/2", 3/16", 1/4". Durable t molding router bits - premium C3 micro-grain tungsten carbide blades with heat resistant teflon coating body, prevent breakage or bending.
BrandLoveDeal #ad
ManufacturerLoveDeal #ad
Part Number20200312003

5. Cydmoty


Cydmoty One Step in Place Stainless Steel Square Slot Cutter for Plastic Metal or Low-Voltage Electrical Boxes mounting Compatible with Most Industry Standard oscillating Multi-Tools Rectangle

Cydmoty #ad - Wide compatibility: Compatible with most industry standard oscillating multi-tools in the market. Attention: used for 18v, 20v or corded oscillating multi-tools some need an adapter.

It will not work on 12V systems. Fine and clean cutting makes the socket installation easier! Strong and durable: High quality stainless steel construction for durability and long life. Quickly and effortlessly: cut-in single and double gang boxes quickly and effortlessly. Precise cutting: precisely create a single gang size of 2-3/8” x 3-3/4” or double gang size of 3-3/4” x 4” in the drywall, perfect for plastic, metal or low-voltage electrical boxes mounting. Four blades are cutting at the same time, fast and simple, and the cutting surface is very smooth and tidy.
BrandCydmoty #ad
ManufacturerCydmoty #ad
Part NumberAWQA-5

6. Freud


1/8",1/4",5/16",3/8",7/16",1/2" Depth Rabbeting Bit Set with interchangeable bearings with 1/4" Shank 32-504, Freud Flush

Freud #ad - Wrench included. 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits. Cuts all composition materials, hardwoods, plywoods, and softwoods. Use on hand-held and table-mounted portable routers. D 1-3/8", carbide height h 1/2", 1/4" Shank. Overall dia.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.38 Pounds
Width1 Inches
Part Number32-504

7. Exqutoo


Exqutoo 3Pcs 1/4" Shank Carbide Round Nose Groove Router Bit Set Template Router planing Head Set with Ball Bearing Engraving Router planing Head Wood Cutter Woodworking Tools Carving Cutting Tool

Exqutoo #ad - 5. Feeding speed: 5-8m/min; spindle speed:18000-24000RPM, please select the correct casing size and use low speed!1. Size shank diameter: 1/2" cutting diameter:  1/2", 3/4", 2-3/8", total length: 2-1/4", 1-1/8"; Cutting Depth:5/8", 2-1/2".

2. Material premium c3 micro-grain tungsten carbide blades, silver induction brazing for maximum strength and durability, Body: Solid Hardened Steel. Build up with heat-resistant ptfe coating for accumulation can reduce resin accumulation, for long-lasting performance, solid hardened steel 45+Hardness bodies with Anti-Kickback Design, thereby achieving quick and easy cleaning.4

4. Applicable scene suitable for plywood, etc. Do not cutting ferrous metal and non wood materials, MDF, wooden door frames, such as: steel, wooden window frames, cabinets and boxes, sand, solid wood, iron, particleboard, etc.3. Tools and fixtures fits most mortising jigs, For both table mount and handheld ROUTER.
BrandExqutoo #ad
ManufacturerZ.hen #ad
Part NumberZH-0035

8. Shuangjia


1/4 inch Cutting Thick, 3/32, 1/8, 3/16, 5/32, Shuangjia Slot Cutter Router Bit Set 6 Pcs 1/4 Inch Shank Slot Cutting Router Bit 5/64

Shuangjia #ad - Suitable for the hand-held and table-mounted router, it can not be used in electric drill & drill machines. Cutting thick: 5/64", 3/32", 1/8", 3/16", 5/32", 1/4". C3 micro-grain tungsten carbide blades with heat resistant Teflon coating. Great for cutting a slot in wood or create grooves. Suitable for softwood such as particleboard, plywood, MDF, etc. The blade is thin and not suitable for cutting high hardness wood! . 6 sizes 1/4 inch shank slot cutter router bit set.
BrandShuangjia #ad
ManufacturerShuangjia #ad
Part NumberAJDF-0293

9. Hougen


Hougen 11075 RotaCut Fractional Cutter Kit with Case

Hougen #ad - Keeps the most often used cutter sizes handy. Kit is packaged in a sturdy case. Small diameter cutter kit. Contains an 11088 arbor assembly, center punch, extra pilot and 7 cutters. 1/4-inch depth of cut.
BrandHougen #ad
ManufacturerHougen #ad
Height0 Inches
Length0 Inches
Weight0.71 Pounds
Width0 Inches
Part Number11075
Warranty90 day warranty