Top 9 Cedar Chest Hinges – Cabinet & Furniture Hinges

As an Amazon Associate I earn from qualifying purchases.

1. HIGHPOINT

#ad

Brass Hinge and Lid Support

#ad
HIGHPOINT #ad - Sold in pairs, screws included. For cedar chests, toolboxes or trunks. Not recommended for toy boxes. Brass plated steel construction. Hinge and lid support.
BrandHIGHPOINT #ad
ManufacturerWoodcraft Supply PW #ad
Height2.05 Inches
Length6.4 Inches
Weight0.63 Pounds
Width5.85 Inches
Part Number141533

2. National Hardware

#ad

2 pack, National Hardware N147-181 V550 Chest Hinges in Brass

#ad
National Hardware #ad - 2 pack. Hinges and screws are semi-concealed when hinge is closed. Manufactured with hot-rolled steel. Designed for chests, cabinets, storages boxes, etc. Tight pin for more secure applications.
BrandNational Hardware #ad
ManufacturerNational Hardware #ad
Height3.1 Inches
Length7 Inches
Width6.1 Inches
Part NumberN147-181
ModelN147-181

3. VOCOMO

#ad

Easy Install, VOCOMO Lid Stay 105 Degree Open with Soft Close, Lid Support Hinge for Toy Box

#ad
VOCOMO #ad - 105 degree open - the lid hinges supports opening the lid at a maximum Angle of 105 degree. Easy to install - easy to follow graphic installation instructions ensure a perfect install the first time. Small compact design - The compact design allows for installation in tight fit areas. Lid support hinge - never worry again about having to prop the lid open. Each hinge can be used for right or left side mounting. This lid stay will hold the lid open until you are ready to close. Soft close - lids will lower slowly and gently to avoid slams shut and crush the little fingers of children.
BrandVOCOMO #ad
ManufacturerVOCOMO #ad
Part NumberHinges-03

4. Tulead

#ad

Tulead Spring Lid Support Left Right Lid Support Down Hinge Red Bronze Iron Support Box Cabinet Hardware Pack of 2 with Mounting Screws

#ad
Tulead #ad - Package content:2 x Spring Lid Support with Mounting Screws. Spring lid support can be mounted on left or right positions. Great for supporting lids on cabinet, chest, box, door, luggage, etc. Total size:182x41x38mm/7. 2"x1. 6"x1. 5"l*w*h. Max weight Support:30lbs.
BrandTulead #ad
ManufacturerTulead #ad
Part NumberADD06180465

5. douper

#ad

Douper Lid Support Hinge in Satin Nickel Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Cupboard Wardrobe Max Weight Support 40lb/2pcs 2 Pack

#ad
douper #ad - After installing the hinge, please tighten the mechanism into Allen wrench hole to prevent lid from slamming shut. Adjustable tension--adjust tension with allen wrench to fit for lids with different weight. The hinge is used for side-mounting and top-mounting.

It will go down slowly, and protect your fingers from being crunched. Support max 40lb/2pcs—made of durable and sturdy zinc alloy in satin Nickel, cupboard and window seat, it is designed for supporting the lid weighing less than 40lb, such as ones of toy chamber, cabinet, and wardrobe. Come with installing screws and Allen wrench. It will not slam shut when the lid stays open. Easy to install—our lid stay allows you to keep it installed for 75°, 90°, and 110° opening.

Conditioned soft closing—only with this hinge supporting less than 40lbs and keeping two hinges in same tension by your adjustment will soft closing function work perfectly. Mark two points for drilling holes, and screw each mounting bracket into its respective place. Random stay—adjust the lid opening angle, and keep it stay in place at different angles without time limit.
Branddouper #ad
Manufacturerdouper #ad
Part NumberFBA_DP056-Big
ModelFBA_DP056-Big

6. Apexstone

#ad

Apexstone Soft Close Lid Support,Safety Lid Support,Soft Down Lid Support,Soft Close Lid Hinge,Set of 2

#ad
Apexstone #ad - We offer 1 year 100% satisfactory warranty, if unfortunately our SOFT DOWN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return. Length center-to-center: 8.

7 inch220 mm, extended Length Center-to-Center:14. 2 inch360 mm. Soft down the door/lid which the side length is less than 30 Inch, the WEIGHT is Less than 30 Lbs. As the installation, the measurements are 3 1/2 inch /90 mm from the back of the lid, you can move the mounting point on the lid 20 mm079 inch towards the opposite direction of the hinges, and 8 5/8 inch/220 mm from the bottom of the cabinet. While if unfortunately you feel it's too weak, 7 5/8 Inch/195 mm from the back of the cabinet, OR you can move it on the cabinet 20 mm079 inch towards the back of the cabinet. Lids lower gently, ideal for soft cLOSING lid to prevent from slamming so that it won't smash kid's fingers.
BrandApexstone #ad
ManufacturerApexstonetek #ad
Weight0.73 Pounds
Part NumberGS5959

7. Ryf

#ad

RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

#ad
Ryf #ad - Easy to install lid hinge --the lid hinge is used for side mounting and top mounting. Soft close stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.

Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Wide usage--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Installing screws and Allen wrench in package. Max weight of lid stay--40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
BrandRyf #ad
ManufacturerRYF #ad

8. RUYUFE

#ad

Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install, RUYUFE Lid Stay 105 Degree Open with Soft Close

#ad
RUYUFE #ad - Keep lid hinge stay opening, such as toy boxes and vanity lids, cabinetry, vertical cabinet doors and storage box, WIDE USAGE -- Never worry again about having to prop the lid open. Lid stay slow closing -- lid stay support built-in hydraulic dampening device.

Easy to install lid support-- updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, piano or butt hinges. Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas.

Sturdy lid stay with soft close-- the lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
BrandRUYUFE #ad
ManufacturerRUYUFE #ad

9. douper

#ad

Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2

#ad
douper #ad - Hinges will not work if your lid doesn’t match specified dimension and weight requirement. Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”.

Strong enough -- douper 200n heavy duty gas struts can support maximum 30lbs lid and lower gently; Weight support will be doubled with 2 hinges 60lbs/ 2pcs. And must with a 9 inch clearance. Gently close design -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Holds lid open -- these hinges will hold your lid open until you push it down.

75°-105° open angle -- each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Note: no adjustments on placement measurements of the hinge mounted on side board. Never worry again about having to prop the lid open.
Branddouper #ad
ManufacturerDouper #ad
Part NumberDP057-TATAMI