As an Amazon Associate I earn from qualifying purchases.
1. Proflex #ad
TEE CSST 1/2"X1/2"X1/2". by PRO-FLEX MfrPartNo PFTE-BBB6 #adProflex #ad
- Dual-size, inside-tapped fittings - ask any installer how handy this feature can be. Annealed tube that allows the tubing to bend and stay bent. 1-piece retainer ring that won’t fall off the fitting during installation.
Convenient, hand-tightening followed by ¼ to ½ turn with a wrench to seal the fitting. Same dual-seal, gasket & O-ring fittings work with both traditional yellow and Flak Jacket products.
|Manufacturer||Pro Flex Llc #ad|
2. HOME-FLEX #ad
Csst Flexible Gas Tubing 1/2" X 75' #adHOME-FLEX #ad
- Bends around corners eliminating need for additional joints and fittings. Cleaner and easier to handle than black steel pipe.
Use coordinating hoME-FLEX CSST fittings. Great for seismic areas - ridged pipe often leaks after even small tremors. Steel pipe fitting. Saves time - 60% time savings vs.
3. LASCO #ad
Yellow, LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings #adLASCO #ad
- Yellow safety coated. For use with Natural Gas or Propane. Length: 72 inch, width: 038 inch, height: 038 inch. Indoor or outdoor use. To connect Gas Dryers. Corrugated Stainless Steel.
|Warranty||Larsen Supply Product Warranty is one year from purchase date. Warranty covers parts only defective due to manufacturers. Product must be installed per manufacturers specification|
4. HOME-FLEX #ad
HomeFlex 11-436-005 1/2-Inch Brass Corrugated Stainless Steel Tubing x MIPT Male Adapter #adHOME-FLEX #ad
- Made of brass. Male type. Used to attach csst both the beginning and end of a run of pipe. At least two fittings needed per installation. Model number: 11-436-005.
5. Duratrac #ad
Easyflex Yellow Coated Stainless Steel 1/2" MIP x 1/2" FIP x 24" Full Flow 1/2" OD Gas Flex Connector #adDuratrac #ad
- Compatible with brasscraft CSSB21 for high rating BTU. Comes with mip and FIP flare fittings. Csa certified and ideal for indoor and outdoor use.
Application includes residential/commercial tank and tankless water heaters, boilers, fryers, stoves. Yellow coated polymer exterior & double corrugated for extra protection and flexibility.
6. Dormont #ad
Dormont Supr-Safe Gas Appliance Connector 0145808 20-3132-36B, 1/2 In. OD 3/8 In. ID 1/2 In. MIP X 1/2 In. FIP X 36 In. Length Uncoated #adDormont #ad
- Fip. Csa approved. Baa compliant. Indoor or Outdoor Use. Included adapters - 90-2031-1 - 1/2 in. Od flare x 1/2 in. 304 stainless steel flexible tubing with plated steel end fittings.
Mip tapped 3/8 in. Fip - 90-2032- 1 - 1/2 In. Od flare x 1/2 In. 71, 100 btu. 100% factory leak tested. Designed for: Clothes Dryers and Water Heaters.
|Model||Supr-Safe Gas Appliance Connector|
|Warranty||Watts Regulator Company (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.|
7. HIGHCRAFT #ad
Yellow/Stainless Steel, Flextron FTGC-YC38-48 46" Flexible Epoxy Coated Gas Line Connector with 1/2" Outer Diameter and Nut Fittings #adHIGHCRAFT #ad
- Nut fittings on both ends. 46" long with 1/2" outer diameter. Flextron part number FTGC-YC38-48. Stainless steel with yellow epoxy coating. Gas dryer and water heater connector.
8. Homewerks #ad
0.5-Inch, Homewerks VGV1LHB3B Premium Gas Ball Valve x Female Thread, Brass #adHomewerks #ad
- Csa cr91-002 certified for use on piping; ansi z21. 15 / csa 9. 1 certified for appliances and appliance connectors. Asme b16. 44 certified for use in above ground piping systems up to 5 PSI. Made in Italy. 1-piece forged brass body. 1/2 psig and 5 G.
|Warranty||Limited Lifetime Warranty|
9. Pro-Flex, LLC #ad
Pro-Flex Brass Male Fitting1/2 #adPro-Flex, LLC #ad
- Tapped to 3/8" female. Size in=1/2, EA. Pro-flex brass male fittings. Includes all components retainer ring, O-ring, Slide Ring, and High Temperature Gasket required to assemble to Pro-Flex tubing.