As an Amazon Associate I earn from qualifying purchases.
1. KREG #ad
Kreg KMA2685 Rip-Cut Circular Saw Guide, Blue #adKREG #ad
- Make rip cuts and crosscuts up to 24" Wide. Cut multiple pieces to the same size With just one setup. Use the oversize edge guide for precise control throughout the cut.
|Manufacturer||Kreg Tool Inc #ad|
|Warranty||90 day warranty|
2. Bora #ad
544008, BORA Rip Guide with Saw Plate + Rip Handle, BORA Cutting System Rip Guide for Circular Saws #adBora #ad
- Now you can confidently make multiple cuts at once. The aluminum rail attaches securely to the Saw Plate for confident cuts. Save time: the rip guide by bora will eliminate the need for marking and measuring each cut.
Use with left- and right-hand saws: securely fit most left- and right-hand circular saws to the BORA Saw Plate and Rip Guide. Stability: large ergonomic rip Guide handle ensures a solid grip.
Lock in your measurement and saw for accurate cuts every time. Repeatable accuracy: the bora rip Guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time.
Easy setup: three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time. Precise rip cuts and crosscuts: get straight accurate rip cuts and crosscuts up to 24 inches 610mm wide on the sheet material you are breaking down.
|Manufacturer||Affinity Tool Works #ad|
3. Swanson Tool Co., Inc #ad
Swanson Tool CG100 Cutting Guide 100-Inch #adSwanson Tool Co., Inc #ad
- A terrific value, backed by 1-year limited. Break-down design makes for easy storage. Made of durable, high-grade anodized aluminum. Cutting guides; joiner bar allows expansion to 100 in.
Includes two 50 in. Low-profile design guides any circular saw, sabre saw, router, or utility knife. Includes c-clamps to easily attach to your work surface for stability when cutting.
|Brand||Swanson Tool Co., Inc #ad|
|Manufacturer||Swanson Tool #ad|
|Warranty||Swanson Tool Co., Inc. warrants its products to be free from defects in material and workmanship for 1 year from the date of the original purchase. Swanson's only liability under this limited warranty shall be at their option to repair or replace any product determined by Swanson to be defective. No damages or other remedies available.|
4. Bora #ad
Saw Plate, Straight Cut Guide for Circular Saws, Includes 24-Inch & 50-Inch WTX Clamp Edges, 50-Inch Extension, 545410, BORA 4-piece WTX Deluxe Set #adBora #ad
- Ruled extrusion allows for easy measurements. Locking handle grabs work surfaces for a secure edge that won't budge. Replacement set for BORA 543400 4-piece set. Fits right- and left-handed circular saws.
Wtx clamp edge is made of heavy-gauge, extruded aluminum for extreme durability. Includes 24-inch & 50-inch wtx clamp Edges, 50" Extension with connectors, Saw Plate. Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
5. JessEm #ad
JessEm 04301 Clear-Cut TS Stock Guides #adJessEm #ad
- Rollers and roller axels: the roller axels are machined from cold rolled steel and case hardened for durability, while rollers are designed from wear-resistant acetal resin. Guides construction: the guides are CNC-machined from 6000 series aluminum and anodized for appearance and durability.
This angle causes the roller to hold with more force if the wood tries to move against the direction of the feed. For 13/16" thick stocks: the guides have 3-1/8" of total vertical travel and can accommodate a maximum stock thickness of 13/16" above the mounting surface when mounted to the T-track.
Grip force urethane rollers hold your stock securely in position. Angled rollers: the unique guide rollers mounted on a 5-degree angle effectively steering your stock towards your fence. Easy set up: the guides lock into position along the track with a twist of the anodized aluminum clamping knobs.
6. Makita #ad
With Stackable Tool case and 55" Guide Rail, Makita SP6000J1 6-1/2" Plunge Circular Saw Kit, Blue #adMakita #ad
- Large cutting capacity 2-3/16" at 90° and 1-9/16" at 45°. Power Type- Corded. Makita sp6000j1 6-1/2" plunge circular saw Kit, with Stackable Tool case and 55" Guide Rail.
Electronic speed control maintains constant speed under load for smooth cutting. Powerful 12. 0 amp motor for optimum performance in a wide variety of materials. Variable speed control dial 2, 000-5, 200 RPM enables user to match the speed to the application.
Precision accurate cutting delivers a splinter-free mirror finish. 12 amp motor with variable speed control dial 2, 000 - 5, 200 RPM for optimum performance in a variety of materials. Bevel capability -1 to 48° with positive stops at 22. 5° and 45°. Large cutting capacity 2-3/16" at 90° and 1-9/16" at 45°.
7. Milescraft #ad
Milescraft 1403 Saw Guide Universal Saw Guide for Circular and Jig Saws Rip Guide Extends 14in Cuts Circles up to 24in #adMilescraft #ad
- Reversible edge guide ensures straight cuts all the way through stock. Up to 14 in. Create perfectly straight edge cuts from 1 in.
Cut circles up to 24 in. Eliminate need for marking, measuring, and layout lines. Universal base plate system works with almost any circular or jig saw. With jig saws.
8. Shop Fox #ad
Shop Fox W2006 Classic Fence with 7-Foot Rails and Legs #adShop Fox #ad
- Easy to install and easy to set up on any brand of saw; UPC-coded packaging. Item may ship in more than one box and may arrive separately. Long rails provide an awesome 54-Inch maximum rip to the right of the blade.
9. Jet #ad
JET 10-Inch Deluxe XACTA Saw, 50-Inch Rip, 3HP, 1Ph 230V 708675PK #adJet #ad
- Csa/cus certified: This saw follows strict guidelines and electrical requirements. Poly-v drive belt system: Delivers efficient, quiet operation. Quick-release riving knife: Hassle-free riving knife changes.
Push-button arbor lock: For rapid blade change. Shrouded blade and 4" dust collection port: Increases dust collection efficiency. Jet red assurance guarantee: Backed by JET's industry-leading five-year warranty.