Top 9 Upcut Spiral Router Bit 1/4 – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Whiteside router Bits are made with Premium Carbide. Industrial Quality. Precision ground for proper balance at high RPM.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Weight0.06 Pounds
Width3 Inches
Part NumberRU2100
ModelRU2100

2. SpeTool

#ad

1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, Carving

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/4-U

3. Whiteside Router Bits

#ad

Whiteside Router Bits RU4700 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Width3 Inches
Part NumberRU4700
ModelRU4700

4. SpeTool

#ad

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Plunge Mortises, better than straight bits. Industrial quality control to ensure best performance. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-U

5. Freud

#ad

Freud 3/8" Dia. Solid Carbide Up Spiral Bit with 1/2" Shank 75-106,Silver

#ad
Freud #ad - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. D 3/8", 2 flutes, cutting length h 1-1/4", 1/2" Shank. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Overall dia.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.14 Pounds
Width1 Inches
Part Number75-106
Model75-106

6. SpeTool

#ad

SpeTool CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank HRC55 Solid Carbide End Mill for Wood Cut, Carving

#ad
SpeTool #ad - Industrial quality control to ensure best performance. For plywood, oak, mdf, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-U

7. CMT

#ad

1/4-Inch Shank,Silver, 1/4-Inch Diameter by 2-1/2-Inch Length, CMT 191.008.11 Solid Carbide Upcut Spiral Bit

#ad
CMT #ad - For cutting, copying, sizing and routing wood products, plastic & laminates. For use on machining centers, point to point machines, CNC routers. 1-inch cutting length, 2 Cutting Edges, Right-Hand Rotation. Also for use on hand-held routers equipped with chucks or adaptors. Premium quality solid Carbide, Excellent finish on the workpiece lower side Upward chip ejection.
BrandCMT #ad
ManufacturerCMT #ad
Height0.25 Inches
Length2 Inches
Weight0.1 Pounds
Width0.25 Inches
Part Number191.008.11
Model191.008.11
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

8. Yonico

#ad

Yonico 14121 1/4-Inch Up-Cut Flush Trim Solid Carbide Spiral Router Bit 1/4-Inch Shank

#ad
Yonico #ad - Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. Flush trim all types of material for a perfect finish. For use on table mount and handheld router. Polished to a mirror finish from a solid carbide rod for precision & accuracy.
BrandYonico #ad
ManufacturerYonico #ad
Height0.25 Inches
Length3 Inches
Width0.25 Inches
Part Number14121
Model14121

9. HAMILY

#ad

PANHAM Router Bit Spiral Bit Up-Cut Solid Carbide 2 Flute with Cutting Diameter 1/4" X CH 1" X SHK 1/4" X L 2-1/2",Shank 1/4" for CNC Cutting

#ad
HAMILY #ad - Used for solid wood, plastics, plywood, soft wood, MDF, non-ferrous metals. High precision Mirror Finish and Lifetime Warranty. Cutting diameter:1/4", cutting length:1", shank Diameter: 1/4" Overall Length:2-1/2" 2 Flutes. Shank chamfer 45-degree design more easy for operation and holding. Premium solid carbide Industrial Quality CNC Router Bits.
BrandHAMILY #ad
ManufacturerHAMILY #ad
Height0.25 Inches
Length2.5 Inches
Width0.25 Inches
ModelZF-H96G-G5LY