As an Amazon Associate I earn from qualifying purchases.
1. Whiteside Router Bits #ad
Whiteside Router Bits 1550 V-Groove 60-Degree 1/2-Inch Cutting Diameter and 7/16-Inch Point Length #adWhiteside Router Bits #ad
- Industrial Quality. Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM.
2. Yonico #ad
Yonico Router Bits V Groove 60 Degree X 1/2-Inch Diameter 1/4-Inch Shank 14993q #adYonico #ad
- Silver induction brazing for maximum strength and durability. Premium c3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. For use on cnc, table mount and handheld routers.
Perfect for cutting v groove paneling and CNC lettering and signage. The cutting diameter is 1/2" and the shank diameter is 1/4". This bit cuts a 60° v groove with a total cutting height of 5/8" and a "v" section height of 7/16".
3. EANOSIC #ad
EANOSIC 60 Degree V Groove Router Bit 1/4 Inch Shank, 3-Flute Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Chamfering #adEANOSIC #ad
- Used on soft and hard woods, plywood compact panel, particle board, MDF, laminate, acrylic and etc. Clean surface, neat, no glitches. Max r. P. M. Industrial grade cnc v groove bit: 1/4” shank; 2”total length; 60 degree; 3 Flutes.
Solid carbide and nano blue coated: the 60 degree v groove router bit is made of solid carbide. 3 flutes designed V Bit to make cutting more efficiently and clean surface.
And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This 1/4 shank 60 degree v bit is perfect for creating beautiful v-groove engraving artwork, CNC lettering and signs and chamfering end. 24000 This provides longevity and produces cutting results of the highest quality.
4. SpeTool #ad
4 Flutes 1/4 inch Shank for CNC Carving and Chamfering, SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree #adSpeTool #ad
- Chamfer end mill with 60 degree, 1/4" Shank Diameter, 2" Overall Length. Solid carbide material with tiain coated, soft wood, applicable for Hard wood, Plywood, OAK, MDF And Metals Under HRC 55. The router bits are super for carving V Groove, CNC Lettering And Signs, And Chamfering End.
V groove router bits can be used in cnc, x carve, 3D carving, router hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.4 flutes designed chamfer Bits to make Cutting More Efficiently And Clean Surface.
5. FoxAlien #ad
60 Degree 0.1mm Engraving Bits, 10pcs Triangular CNC Router Bits V-Bit, 1/8” Shank Nano Blue Coating Sharp Pyramid Bits for Acrylic Wood MDF Aluminum Lettering Sign Making #adFoxAlien #ad
- 1/8” shank; 60deg 01mm v bitshank size are 1/8 inch. Ultrafine carbide material ensures its engraving and milling performance. Suitable for lettering and sign making.
Longer service lifenano blue coating strengthens the hardness so that the service life is extended and the bits are more durable and wear-resistant. Wide applicationsit is widely used to engrave, plastic fiber, resin, acrylic, cut and carve on hardwood, plywood, mill, PCB, drill, aluminum and other material.
Durable & well-madesharp cutting edge, no glitches on the surface. Easy to remove chips, not easy to stick dust. Triangular engraving bitstriangular v shape can be used in 2D and 3D carving. 60 degree 01mm v-bit is commonly used in CNC engraving.
6. Amana Tool #ad
Industrial Grade, Amana Tool, V Groove Insert 60° 1/4 Shk RC-1148 #adAmana Tool #ad
- U. S. A. Solutions for manufacturers, fabricators, display and cabinet professionals. Industrial grade. Devotion to consistently providing the highest quality.
Commitment to offer the highest consistent quality and innovative products. Corporate headquarters and warehouse, located in new York.
|Brand||Amana Tool #ad|
|Manufacturer||Amana Tool #ad|
7. Amana Tool #ad
Amana Tool 45624-K SC Spektra Extreme Tool Life Coated V-Groove 60 Deg x 1/4 D x 31/64 CH x 1/4 Inch SHK 3-Flute Router Bit #adAmana Tool #ad
- 1/4 inch Shank. Made in USA. Specifications: diameter d: 1/4 angle a: 60 cutting height b: 31/64 Shank d: 1/4 Overall Length L: 2 B1: 7/32 Flutes: 3.
8. SPEED TIGER #ad
CNC Carving Bits, 1/4"Shank 2"OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan1 Piece, V Groove, 60 Degree, 60 Degree, SPEED TIGER ICSM Chamfer End Mill #adSPEED TIGER #ad
- General application cutter - speed tiger carbide tools excel at working wood, hardened Steels HRC40~45, pre-hardened steels up to HRC45, carbon steels ~HB225, copper, aluminum, alloy steels HB225~325, MDF, cast iron.
Ideal for chamfering, Carving V Groove, Centering. High performance for hard materials - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
60 degree, shank diameter: 1/4", Full Length: 2”. Zrn-a coating - zirconium nitride zrn +titanium aluminum boron nitride AlTiBN coating lubricates the end mill for stability at high temperatures and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
|Brand||SPEED TIGER #ad|
|Manufacturer||SPEED TIGER #ad|
9. AZZUTORK #ad
20, 2 Flutes Straight CNC V-bit Tungsten Steel Marking Conical Engraving Router Tool-4 Pack, Engraving CNC Wood Carving Router Bit Set 1/4 Inch Shank 15, 90 Degree Engraving Bits, 60 #adAZZUTORK #ad
- Works well with spring loaded engraving tools, wood panels, brass, end mill holders and top loading engraving machines etc. If you have any problems please feel free to contact us, very sharp. Fastly engrave and cut, extremely sharp edge provides smoothly cutting, no glitches and high precision.
With a unique mirror grinding processing for cutting edge produces an excellent surface finish. 4 different sizes cnc engraving bits set to satisfy all you demand: 15 degree detail carving bit for carving liner/ 20 degree profile bit（ A flat cut tip for outlining letters in wood signs, tracing lines and cleaning/ 60 and 90 degree V bits are great for V-groove.
High precision grinding and great concentricity for reducing chance of burr and deviation. The carving router bits are made of tungsten steel, High-performance industrial quality tool.
Mainly used for the engraving and marking of wood, aluminum, MDF, CNC milling machines, stainless steel, acrylic, collets, medium density fiberboard, plastic and many other soft gummy materials. Reduce chance of burr and deviation. It’s precisely milled, an exceptionally durable tool bit for lasting longer than other engraving tools when engraving metal. Fantastic bit for fine detail carving on CNC, we will try our best and let you satisfaction.