Top 9 Woodworkers Edge Rule – Construction Rulers

As an Amazon Associate I earn from qualifying purchases.

1. CEISPOB

#ad

T Square Ruler Adjustable Protractor Angle Finder Two Arm Stainless Steel Goniometer Angle Measuring Tool, Woodworkers Edge Rule, Best Woodworking Gifts 8 in

#ad
CEISPOB #ad - The graduations are held to a tolerance of ±. 004" total accumulated error over the length of the blade. The pin snaps into place giving you the confidence to know it is spot-on accurate. Woodworkers edge rule:the secret to the t-square is the series of precisely machined indexing holes and the spring-loaded, tight-tolerance indexing pin that meshes with them.

Perfect woodworking tools:even when you’re not working with angles, this is a lay out tool you’ll reach for on almost every project. Three sizes available: the t-square comes in 3 blade lengths, satin-finish stainless-steel blade is easy to read and minimizes parallax error. Just press the head to the desired angle, and then press the straight line. The protractor and ruler of the angle measuring tool adopt precision laser etching, easy to read, the reading is clear and accurate, durable and easy to use.

Both edges of the blade are laser engraved with an inch scale in 1/32” increments. Each one comes with a wall-mountable to keep your T-Square handy, 8, 13 and 18 inches. The thin, yet out of harm’s way. The blade features the same exclusive “saw-tooth” design scribing notches found in our new Stainless Steel Precision Woodworking Squares. The head can be adjusted between 0° and 70°, and is firmly locked every 5° plus 22-1 / 2° and 67-1 / 2°, so as to provide you with an accurate reference angle and length respectively.
BrandCEISPOB #ad
ManufacturerCEISPOB #ad
Part NumberCEISPOB-16888

2. TOODOO

#ad

Woodworkers Edge Rule Protractor Woodworking Ruler Angle Measure Tool 2 Arms T Square Stainless Steel 0-70 Degree Adjustable Protractor Angle for Student Drawing Artist Crafts Stationery 10 Inch

#ad
TOODOO #ad - Apply with confidence: edge protractor adopts good laser etching; The reading is clear, and 2 arms design provides nice accuracy for your panel layout work, convenient to use, so you can apply it confidently. Wide range of application: woodworking measure tool is applicable for varied projects, like engineering, length measurement, student drawing, carpenters, and also fits for students, carpentry, angle measurement, architectural design, architects and designers.

Easy to use: just place the pencil in the notch and slide the pen tip along the edge of the barrel to get a suitable parallel line; Then press the straight line, the head is locked tightly every 5 degrees to provide you with right reference angle and length respectively. Practical and convenient: using laser engraving, and the parallax error is also reduced, the total cumulative error of the scale on the entire blade length is small; It is a layout tool that can be widely applied in different projects; The scale is easy to read, providing you with the correct ratio for your convenience and simplifying your life.

What you get: you will receive a 10 inch woodworkers edge rule protractor; Even the most skilled carpenter faces the challenge of placing right angles on large-scale panel projects; Besides, this tool can assist in reducing visual errors.
BrandTOODOO #ad
ManufacturerTOODOO #ad
Part NumberTOODOO-Ruler-01

3. Musibo

#ad

Woodworkers Edge Ruler, MUSIBO Adjustable Protractor Angle Finder, Multi-Function Angle Measure Tool Woodworking Ruler Kit with Wall Hanging Storage Rack13in

#ad
Musibo #ad - Simple operation: you can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. High quality: the dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, does not fade, which is moisture-proof, rust-proof and corrosion-resistant.

There are 104 serrated notches and 13 circular holes, every 5° plus 22-1/ 2°, The spacing of the serrations is 11/112in approximately equal to 2. 49 mm and that of the round holes is 1in. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. If the product is defective, or you can consult us if you have any questions during use. Adjust the nut to get the best feel.

Multi-function: musibo woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. In short, you can draw any line you want with this ruler. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. The laser scale is clear and precise, and effectively extends its service life. After-sales service: if you have any questions after receiving the goods, please contact us as soon as possible, please contact us to return it for you, we will provide you with good after-sales service.
BrandMusibo #ad
ManufacturerMusibo #ad
Weight0.36 Pounds
Part NumberMUSI0020MGBYC

4. AIRBAY

#ad

An Great Gift For Father's Day 10inch, Woodworkers Edge Rule Angle Finder 0-70°Adjustable Protractor Efficient Goniometer Stainless Steel Layout Tools For Craftsman Machinist

#ad
AIRBAY #ad - High accuracythe series of precisely machined indexing holes and the spring-loaded, tight-tolerance indexing pin that meshes with them. After sales service any issues concerned after receiving or use, please contact us freely, we will try to issue you a reasonable solution.

The head can be adjusted between 0° and 70°, and is firmly locked every 5° plus 22-1 / 2° and 67-1 / 2°. It is an essential tool for woodworking. Stainless steel rulereven when you’re not working with angles, satin-finish stainless-steel blade is easy to read and minimizes parallax error. The thin, rust and corrosion resistance, it has high durability and abrasion resistance. Measurement2-in-1 device for length measuring and angle measuring respectively they are 10 inches and 15 inches long.

Each one comes with a wall mount. The customer's satisfaction is our priority goal. It performs better in waterproofing, this is a lay out tool you’ll reach for on almost every project. Just press the head to the desired angle, and then press the straight line. The pin snaps into place giving accurate spot. Every 16 inches exists a notch all along the blade.
BrandAIRBAY #ad
ManufacturerAIRBAY #ad
Part Numbers00

5. CEISPOB

#ad

Best Woodworking Gifts 13 in, Woodworkers Edge Rule, T Square Ruler Adjustable Protractor Angle Finder Two Arm Stainless Steel Goniometer Angle Measuring Tool

#ad
CEISPOB #ad - Unparalleled precision design:our latest precision ruler can provide unparalleled accuracy for your panel layout work. There’s a notch every sixteenth-inch all along the blade. Each one comes with a wall-mountable to keep your T-Square handy, 13 and 18 inches. The head can be adjusted between 0° and 70°, and is firmly locked every 5° plus 22-1 / 2° and 67-1 / 2°, so as to provide you with an accurate reference angle and length respectively.

Just drop your pencil in the notch and slide the head along the edge of your stock for a perfectly parallel line. The graduations are held to a tolerance of ±. 004" total accumulated error over the length of the blade. Both edges of the blade are laser engraved with an inch scale in 1/32” increments. Woodworkers edge rule:the secret to the t-square is the series of precisely machined indexing holes and the spring-loaded, tight-tolerance indexing pin that meshes with them.

Just press the head to the desired angle, and then press the straight line. The thin, 8, yet out of harm’s way. Digital protractor angle finder:the new woodworkers edge rule simplifies your life by wrapping around the edge of your stock and giving you an accurate scale on both sides. The blade features the same exclusive “saw-tooth” design scribing notches found in our new Stainless Steel Precision Woodworking Squares.
BrandCEISPOB #ad
ManufacturerCEISPOB #ad
Part NumberCEISPOB-16888

6. Nobgum

#ad

20Inch Adjustable Protractor Woodworkers Edge Rule Angle Finder Two Arm Stainless Steel Woodworking Ruler Measuring Tools with Wall hanging Storage Rack for Woodworking Artist Craftsman Measure DIY

#ad
Nobgum #ad - The combination of ruler and protractor. Just press the head to the desired angle, and then press the straight line. The blade features the same exclusive “saw-tooth” design scribing notches found in our new Stainless Steel Precision Woodworking Squares. The stainless steel t-rule is made of good quality Stainless Steel, durable and sturdy;A good measuring tool, easy and convenient to use.

Size is about 605*26cm. Just drop your pencil in the notch and slide the head along the edge of your stock for a perfectly parallel line. Our new woodworking edge ruler work beautifully to draw lines exactly where you want them to be, which is very suitable for woodworking and will be a good helper for you. Each one comes with a wall-able to keep your T-Ruler handy, yet out of harm’s way. The head can be adjusted between 0° and 70°, and is firmly locked every 5° plus 22-1 / 2° and 67-1 / 2°, so as to provide you with an accurate reference angle and length respectively.

You can use it in every corner to design different patterns, construction, machinists, give full play to your design ability. Perfect for students, carpenters and woodworking hobbyists, vehicle maintenance and repairing, drawing for draw radial lines, setting bevels and transferring angles. There’s a notch every sixteenth-inch all along the blade.
BrandNobgum #ad
ManufacturerNobgum #ad
Part NumberUSB087

7. Nobgum

#ad

15Inch Adjustable Protractor Woodworkers Edge Rule Angle Finder Two Arm Stainless Steel Woodworking Ruler Measuring Tools with Wall hanging Storage Rack for Woodworking Artist Craftsman Measure DIY

#ad
Nobgum #ad - The head can be adjusted between 0° and 70°, giving you precise reference angle and length. Protractor woodworking ruler for design different patterns, carpenters and woodworking hobbyists, construction, machinists, drawing for draw radial lines, vehicle maintenance and repairing, give full play to your design ability.

Angle stainless steel ruler can provide unparalleled accuracy for your panel layout work. Just press the head to the desired angle, and is firmly locked every 5° plus 22-1 / 2° and 67-1 / 2°, and then press the straight line. What you get, ruler size 26*47. 5cm, 1pcs 15-inch woodworkers Edge Rule with wall mount, wall bracket size 12*31cm. T square ruler made of high quality stainless steel for longer durability, abrasion resistance. Precisely machined indexing holes and the spring-loaded, tight-tolerance indexing pin that meshes with them.

Our new woodworking edge ruler work beautifully to draw lines exactly where you want them to be, which is very suitable for woodworking and will be a good helper for you. Each one comes with a wall-able to keep your Ruler handy, yet out of harm’s way. Perfect for students, setting bevels and transferring angles. The pin snaps into place giving you the confidence to know it is spot-on accurate.
BrandNobgum #ad
ManufacturerNobgum #ad
Part NumberUSB086

8. Volterin

#ad

20 Inches Woodworkers Edge Rule for Woodworking with Bracket, Digital Angle Finder Protractor, with Swing Two Arm Measuring Stainless Steel Goniometer Ruler

#ad
Volterin #ad - The new wood workers edge rule simplifies your life by wrapping around the edge of your stock and giving you an accurate scale on both sides.
BrandVolterin #ad
ManufacturerVolterin #ad
Part NumberSpl022

9. GFNet

#ad

Baseboard Crafts Stationery Geometry |Gift For Father's Day Woodworkers Edge Rule 15 inch, Woodworkers Edge Rule -Protractor Angle Protractor Two Arm 10/15in Woodworking Ruler Angle Measure Tool

#ad
GFNet #ad - Perfect woodworking layout tools- even when you’re not working with angles, this is a lay out tool you’ll reach for on almost every project. Woodworkers edge rule- the secret to the t-square is the series of precisely machined indexing holes and the spring-loaded, tight-tolerance indexing pin that meshes with them.

The thin, satin-finish stainless-steel blade is easy to read and minimizes parallax error. A great gift for father's day- the new wood workers Edge Rule simplifies your life by wrapping around the edge of your stock and giving you an accurate scale on both sides. Two sizes available- it is 10 inches, 15 inches. Both edges of the blade are laser engraved with an inch scale in 1/32” increments. Just press the head to the desired angle, and is firmly locked every 5° plus 22-1 / 2° and 67-1 / 2°, and then press the straight line.

The head can be adjusted between 0° and 70°, so as to provide you with an accurate reference angle and length respectively. The graduations are held to a tolerance of ±. 004" total accumulated error over the length of the blade. The blade features the same exclusive “saw-tooth” design notches found in our new Stainless Steel Precision Woodworking Squares. Unparalleled accuracy- our latest precision ruler can provide unparalleled accuracy for your panel layout work.
BrandGFNet #ad
ManufacturerGFNet #ad
Part NumberGFNet2021-5-25