Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-300 psi, 2-1/2″ Dial Display, +/-1.5% Accuracy, 1/4″ NPT Bottom Mount

#ad
#ad
Winters PFQ807R1 #ad - The winters pfq series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1. 5% or 2. 5%. The ot58 brass wetted parts are for measuring non-corrosive liquid and gas pressure.

The operating temperature is -4 to 150 degrees F -20 to 65 degrees C. Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2. 5" 63 mm and 4" 100 mm gauges. For instance, gauge pressure measures pressure relative to ambient air.

Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-300 psi, 2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - Vacuum/bar. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. The movement is OT59 brass, and the welding is silver alloy. Vacuum/kPa, or Hg. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing.

An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge.

More information about Winters PFQ807R1 #ad

Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-100 psi, 2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ804R1 #ad - The gauge is accurate to + or - 2. 5% of full scale value for the 1. 5" and 2" dials and accurate to + or - 1. 5% of full scale value for the 2. 5" and 4" dials. The 6" 150 mm socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. Most often, pressure gauges measure pressure relative to another reference.

All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range. Winters instruments manufactures pressure gauges, thermometers, pressure transmitters, diaphragm seals, and switches.

Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-100 psi, 2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - The operating temperature is -4 to 150 degrees F -20 to 65 degrees C. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. This pressure gauge is suitable for pumps, machinery, compressors, hydraulic presses, pneumatic equipment, and motors in harsh environments.

Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. The male connection comes with a 1/8", 1/4", or 1/2" NPT National Pipe Thread rate with a restricted orifice and is located at the bottom or center back of the gauge.

An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge.

More information about Winters PFQ804R1 #ad


Similar products



Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-160 psi, 2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ805R1 #ad - Brass wetted parts for measuring non-corrosive liquid and gas pressure. The movement is OT59 brass, and the welding is silver alloy. Vacuum/kPa/Hg. The 6" 150 mm socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids.

An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. The male connection comes with a 1/8", 1/4", or 1/2" NPT National Pipe Thread rate with a restricted orifice and is located at the bottom or center back of the gauge. The circular dial comes in 1.

Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-160 psi, 2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - 5" 40 mm, 2" 50 mm, 2. 5" 63 mm, or 4" 100 mm diameters and is filled with glycerin for protection against vibration and pulsation. Vacuum/bar. Vacuum/bar. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg.

The over-pressure limit is 25% for pressures up to 1, 400psi 9, 653kPa and 15% for pressures over 1, 400psi 9, 653kPa.

More information about Winters PFQ805R1 #ad


Similar products



Parker Hannifin PD242 Series PD Steel Test Port and Diagnostic Equipment Quick Coupler with Female Pipe Thread, 1/8" Body Size, 1/4"-18 NPTF Thread Size, 2.12" Length

#ad
#ad
Parker Hannifin Corporation PD242 #ad - Sae j1502 / iso 15171-1 conformance provides global interchangeability with other test point couplings manufactured to the same specifications. Pd couplers allow test instruments, transducers, gauges, and flow sensors to be quickly and easily connected to system test points. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg.

Flush face valves minimize air inclusion and spillage. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. These push to connect quick couplings provide easy connection for mechanical gauges or specialized diagnostic equipment including SensoControl meters and accessories.

Parker Hannifin PD242 Series PD Steel Test Port and Diagnostic Equipment Quick Coupler with Female Pipe Thread, 1/8" Body Size, 1/4"-18 NPTF Thread Size, 2.12" Length #ad - Vacuum/bar. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Brass wetted parts for measuring non-corrosive liquid and gas pressure. Suitable for use with hydraulic or pneumatic systems. Vacuum/bar. Vacuum/kPa/Hg. Easy push to connect operation. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice.

More information about Parker Hannifin Corporation PD242 #ad


Similar products



Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-30 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ802 #ad - Vacuum/bar. Compatible with Parker's SensoControl diagnostic equipment. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2.

5" 63 mm and 4" 100 mm gauges. Vacuum/bar. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Easy push to connect operation. Vacuum/bar. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Brass wetted parts for measuring non-corrosive liquid and gas pressure.

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-30 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - Suitable for use with hydraulic or pneumatic systems. Flush face valves minimize air inclusion and spillage. Vacuum/kPa/Hg. Sae j1502 / iso 15171-1 conformance provides global interchangeability with other test point couplings manufactured to the same specifications. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice.

Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg.

More information about Winters PFQ802 #ad


Similar products



Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-5000 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ812 #ad - Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. The 6" 150 mm socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal.

The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. Compatible with Parker's SensoControl diagnostic equipment. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg.

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-5000 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - Brass wetted parts for measuring non-corrosive liquid and gas pressure. The circular dial comes in 1. 5" 40 mm, 2" 50 mm, 2. 5" 63 mm, or 4" 100 mm diameters and is filled with glycerin for protection against vibration and pulsation. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.

The working pressure is a maximum of 75% of full scale value. Brass wetted parts for measuring non-corrosive liquid and gas pressure. Display accuracy is + or - 2.

More information about Winters PFQ812 #ad


Similar products



Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-10000 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ813 #ad - Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Sae j1502 / iso 15171-1 conformance provides global interchangeability with other test point couplings manufactured to the same specifications.

Flush face valves minimize air inclusion and spillage. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range. Winters instruments manufactures pressure gauges, diaphragm seals, pressure transmitters, thermometers, and switches.

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-10000 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - Vacuum/kPa/Hg. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. The winters pfq series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.

5% or 2. 5%. Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1.

More information about Winters PFQ813 #ad


Similar products



Stainless Steel Case, Brass, 1/4" NPT, Lower Mount Connection 0-300PSI - 2-1/2" Oil Filled Pressure Gauge

#ad
#ad
DuraChoice PB254L-300 #ad - Stainless steel case, Copper alloy wetted parts. Easy push to connect operation. 1/4" lower mount connection. Suitable for use with hydraulic or pneumatic systems. Vacuum/kPa/Hg. Vacuum/kPa/Hg. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Display accuracy is + or - 2.

Stainless Steel Case, Brass, 1/4" NPT, Lower Mount Connection 0-300PSI - 2-1/2" Oil Filled Pressure Gauge #ad - 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2. 5" 63 mm and 4" 100 mm gauges. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Vacuum/bar. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice.

Vacuum/kPa/Hg. Vacuum/bar. Vacuum/bar. Brass wetted parts for measuring non-corrosive liquid and gas pressure. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.

More information about DuraChoice PB254L-300 #ad


Similar products



Apache 98399064 1/4" x 18" 2-Wire Hydraulic Hose Male x Male Assembly

#ad
#ad
Apache Inc 98399064 #ad - When purchasing pipe fittings, as this will affect material type, consider the application, shape, size and required durability. Black, nitrile tube for flexibility and oil resistance. Broad applications - water, oil, air and more. Professional quality & durability. Sae j1502 / iso 15171-1 conformance provides global interchangeability with other test point couplings manufactured to the same specifications.

Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Brass wetted parts for measuring non-corrosive liquid and gas pressure. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice.

Apache 98399064 1/4" x 18" 2-Wire Hydraulic Hose Male x Male Assembly #ad - Rated to 5000 psi for high-pressure hydraulic applications. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Vacuum/bar. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Suitable for use with hydraulic or pneumatic systems.

Vacuum/kPa/Hg.

More information about Apache Inc 98399064 #ad


Similar products



2-1/2" Oil Filled Pressure Gauge - Stainless Steel Case, Brass, 1/4" NPT, Lower Mount Connection 0-200PSI

#ad
#ad
DuraChoice PB254L-200 #ad - Broad applications - water, oil, air and more. Vacuum/kPa/Hg. Easy push to connect operation. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Solid steel fittings for durability. Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2.

5" 63 mm and 4" 100 mm gauges. Vacuum/kPa/Hg. Two braids of high-tensile steel wire in tubing for reinforcement and added durability. 1/4" lower mount connection. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Suitable for use with hydraulic or pneumatic systems. Broad applications - water, oil, air and more.

2-1/2" Oil Filled Pressure Gauge - Stainless Steel Case, Brass, 1/4" NPT, Lower Mount Connection 0-200PSI #ad - Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2. 5" 63 mm and 4" 100 mm gauges. Brass wetted parts for measuring non-corrosive liquid and gas pressure.

More information about DuraChoice PB254L-200 #ad


Similar products



Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-600 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ808 #ad - Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Vacuum/bar. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Broad applications - water, oil, air and more. Stainless steel case, Copper alloy wetted parts.

Suitable for use with hydraulic or pneumatic systems. Professional quality & durability. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. This item is new, including original packaging! Brass wetted parts for measuring non-corrosive liquid and gas pressure. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg.

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-600 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - 1/4" lower mount connection. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Brass wetted parts for measuring non-corrosive liquid and gas pressure. Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1.

5% of full scale value for the 2.

More information about Winters PFQ808 #ad


Similar products